Presently, there is a growing need for handling ASR (automobile shredder residues) or 'car fluff'. One of the most promising methods of treatment ASR is pyrolysis. Apart of obvious benefits of pyrolysis: energy and metals recovery, there is serious concern about the residues generated from that process needing to be recycled. Unfortunately, not much work has been reported providing a solution for treatment the wastes after pyrolysis. This work proposes a new system based on a two-staged process. The ASR was primarily treated by microwave pyrolysis and later the liquid and solid products become the feedstock for the high temperature gasification process. The system development is supported within experimental results conducted in a lab-scale, batch-type reactor at the Royal Institute of Technology (KTH). The heating rate, mass loss, gas composition, LHV and gas yield of producer gas vs. residence time are reported for the steam temperature of 1173 deg K. The sample input was 10 g and the steam flow rate was 0.65 kg/h. The conversion reached 99% for liquids and 45 to 55% for solids, dependently from the fraction. The H2:CO mol/mol ratio varied from 1.72 solids and 1.4 for liquid, respectively. The average LHV of generated gas was 15.8 MJ/N m3 for liquids and 15 MJ/N m3 for solids fuels.
Recycling of automobile shredder residue with a microwave pyrolysis combined with high temperature steam gasification
Journal of Hazardous Materials ; 182 , 1-3 ; 80-89
2010
10 Seiten
Aufsatz (Zeitschrift)
Englisch
Pyrolysis: A "Recycling" Option for Automobile Shredder Residue
British Library Conference Proceedings | 1995
|Pyrolysis: A “Recycling” Option for Automobile Shredder Residue
SAE Technical Papers | 1995
|Study of gasification characteristics of automobile shredder residue
Kraftfahrwesen | 2001
|Progress in recycling of automobile shredder residue
Tema Archiv | 1996
|Study of gasification characteristics of automobile shredder residue
Online Contents | 2001
|