In recent years, several natural gas pipeline projects have been planned for permafrost regions. Pipelines laid in such areas are subjected to large plastic deformation as a result of ground movement due to repeated thawing and freezing of the frozen ground. Likewise, in pipeline design methods, research on application of strain-based design as an alternative to the conventional stress-based design method has begun. Much effort has been devoted to the application of strain-based design to high strength linepipe materials. In order to verify the applicability of high-strain X100 linepipe to long distance transmission. a large-scale X100 pipeline was constructed using linepipe with an OD (outer diameter) of 42'' and wall thickness of 14.3 mm. This paper presents the results of experiments and FEA (Finite Element Analysis) focusing on the strain capacity of high-strain X100 linepipes. The critical compressive strain of X100 high-strain linepipes is discussed based on the results of FEA taking into account geometric imperfections. The critical tensile strain for high-strain X100 pipelines is obtained based on a CWP (curved wide plate) tensile test using specimens taken from girth welded joints. Specifically, the effect of external coating treatment on the strain capacity of X100 high-strain linepipe is investigated. The strain capacity of the 42'' X100 pipeline is considered by comparing the tensile strain limit obtained from girth weld fracture and critical compressive strain which occurs in local buckling under pure bending deformation.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Strain capacity of X100 high-strain linepipe for strain-based design application


    Weitere Titelangaben:

    Verformungskapazität eines hoch verformungsfähigen X100-Leitungsrohres zur Anwendung im verformungsbasierten Design


    Beteiligte:
    Igi, Satoshi (Autor:in) / Kondo, Joe (Autor:in) / Suzuki, Nobuhisa (Autor:in) / Zhou, Joe (Autor:in) / Duan, Da-Ming (Autor:in)


    Erscheinungsdatum :

    2008


    Format / Umfang :

    8 Seiten, 16 Bilder, 5 Tabellen, 17 Quellen



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Mass production and installation of X100 linepipe for strain-based design application

    Ishikawa, Nobuyuki / Okatsu, Mitsuhiro / Endo, Shigeru et al. | Tema Archiv | 2008


    Development of X80/X100 linepipe steel plates and pipes for strain based design pipeline

    Seo, Dong-Han / Yoo, Jang-Yong / Song, Woo-Hyun et al. | Tema Archiv | 2009


    Numerical Evaluation of Compressive Strain Capacity for API X100 Line Pipe

    Lee, Seung-Jung / Cho, Woo-Yeon / Kim, Ki-Seok et al. | Online Contents | 2018


    Numerical Evaluation of Compressive Strain Capacity for API X100 Line Pipe

    Lee, Seung-Jung / Cho, Woo-Yeon / Kim, Ki-Seok et al. | Springer Verlag | 2017


    Compressive strain limits of large diameter X80 UOE linepipe

    Timms, Chris M.J. / DeGeer, Duane D. / Chebaro, Mohamed R. et al. | Tema Archiv | 2009