Armour steels have typically been used in the construction of light armoured vehicles. Improvement in performance of armour is usually achieved by increasing the strength of the steel. In this paper, an experimental study has been carried out to investigate the performance improvement in steel through incorporation of perforations in the plate. Circular holes of diameter equal to that of the projectile were drilled in high hardness armour steel plates. These plates were subjected to ballistic impact of 7.62 mm AP projectiles by backing them with thick plate of 7017 Aluminium alloy. Improvement in efficiency of such perforated plates was evaluated by comparing the DOP under different conditions of impact. Results show that there is an improvement of about 37% in thickness efficiency and about 70% in mass efficiency of high hardness armour steel only due to perforations. Computational simulations were also carried out to correlate the effects of perforated armour. Results of experiments and simulations showed good correlation. Photographs of the target and backing plate after the experiments along with analysis of the ballistic efficiency of the perforated armour have been presented in this paper.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    An experimental and numerical study of edge impact of 7.62 mm AP projectile on perforated high hardness armour steel plates


    Weitere Titelangaben:

    Eine experimentelle und numerische Studie des Kantenaufpralls eines 7.62 mm AP-Projektiles auf perforierte Panzerstahlbleche hoher Härte


    Beteiligte:
    Ramakrishna, B. (Autor:in) / Mishra, B. (Autor:in) / Madhu, V. (Autor:in) / Bhat, T.B. (Autor:in) / Gupta, N.K. (Autor:in)


    Erscheinungsdatum :

    2009


    Format / Umfang :

    12 Seiten, 10 Bilder, 1 Tabelle, 12 Quellen



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Investigation on the ballistic performance of a dual phase steel against 7.62 mm AP projectile

    Übeyli, Mustafa / Demir, Teyfik / Deniz, Hüseyin et al. | Tema Archiv | 2010


    Variable-amplitude fatigue testing of a high hardness armour steel

    Khan, M.Z.S. / Alkemade, S.J. / Weston, G.M. et al. | Tema Archiv | 1998


    A numerical study of projectile impact on thin aluminium plates

    Raguraman, M. / Deb, A. / Jagadeesh, G. | Tema Archiv | 2009



    Structural and Projectile Impact Analysis of Hybrid Armour Structure of a Tracked Vehicle

    Roopchand, J. / Hanumanna, D. / Radhakrishnan, R. et al. | British Library Conference Proceedings | 2004