The purpose of this paper is to present a protocol of inverted drop-tests using a 50th percentile Hybrid III Anthropomorphic Test Device (ATD) and investigate the influence of angle and velocity at impact on neck injury risk assessment. The tests were based on existing cadaveric experimental protocols for inverted seated positions. In this study selected ATD impact orientations were also assessed in both the sagittal and coronal planes. Twenty-six tests were performed at impact velocities from 1.4 to 3.1 m/s. The drop tests confirmed previously described behavior of the ATD in axial loading of its head/neck/thorax complex. They also showed a significant influence of the initial impact angle on neck injury criteria currently used by researchers in rollover crashworthiness tests. At 1,4 m/s, the peak upper neck axial force of 4350 N was reduced by an average 1760+/-80 N for configurations with 30 degrees initial impact angle in any plane, compared to a reference inverted vertical configuration. The N-v was also significantly influenced. For a given impact velocity, an out-of-both-planes initial configuration resulted in the highest combined outputs. Based on these results, similar dynamic conditions (intrusion velocity, impact duration) may result in significantly different loadings of the Hybrid III neck.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Hybrid III ATD in inverted impacts: Influence of impact angle on neck injury risk assessment


    Weitere Titelangaben:

    Das Prüfgerät Hybrid III ATD bei inversen Stößen: Einfluß des Stoßwinkel auf die Risikoabschätzung von Nackenverletzungen


    Beteiligte:
    Frechede, B. (Autor:in) / McIntosh, A. (Autor:in) / Grzebieta, R. (Autor:in) / Bambach, M. (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2009


    Format / Umfang :

    12 Seiten, 8 Bilder, 3 Tabellen, 39 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch