The low specific gravity of magnesium has made Mg-alloys attractive for automotive and aerospace applications. Conventional Mg casting alloys have been based on the Mg-Al system with additions of Zn, Mn or Si, e.g. AZ91 alloy (Mg-9.0Al-1.0Zn, wt.). Such alloys, which have good castability, mechanical properties and corrosion resistance, are widely used in the automotive industry. However, due to the rapid degradation of the mechanical properties at elevated temperatures, especially the creep resistance, application of these alloys has been limited to specific components that operate at temperatures below 150 deg C. New creep-resistant Mg casting alloys are required for application as transmission cases (temperatures up to 175 deg C), engine blocks (250 deg C) and pistons (300 deg C). The development of such high performance creep-resistant alloys requires the development of microstructures in the cast alloy that both prevent grain boundary sliding and restrict the motion of lattice dislocations within the primary -Mg grains. The development of Mg-Al-Ca casting alloys is described where Ca-containing eutectic phases are precipitated along the grain boundaries and where dislocation motion within the grains is restricted due to solid solution hardening and the presence of dispersed nanoscale eutectic phases.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of creep-resistant magnesium casting alloys for high temperature automotive applications


    Weitere Titelangaben:

    Entwicklung kriechfester Magnesiumgusslegierungen für Hochtemperatur-Kfz-Anwendungen


    Beteiligte:
    Han, L. (Autor:in) / Hu, H. (Autor:in) / Northwood, D.O. (Autor:in)


    Erscheinungsdatum :

    2008


    Format / Umfang :

    10 Seiten, 18 Quellen





    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    High temperature-creep resistant magnesium alloys: advances in thixomolding automotive components

    Nyberg,E.A. / Jones,R.H. / Pitman,S.G. et al. | Kraftfahrwesen | 2000


    High Temperature-Creep Resistant Magnesium Alloys: Advances in Thixomolding Automotive Components

    Nyberg, E. A. / Jones, R. H. / Pitman, S. G. et al. | British Library Conference Proceedings | 2000


    High Temperature-Creep Resistant Magnesium Alloys:Advances in Thixomolding Automotive Components

    Nyberg, Eric A. / Decker, Raymond F. / Carnahan, Robert D. et al. | SAE Technical Papers | 2000


    High Temperature Creep Resistant Alloys

    Emerald Group Publishing | 1988


    Development of Creep-Resistant Magnesium Alloys for Powertrain Applications: Part 1 of 2

    Luo, Alan A. / Tiwari, Basant L. / Powell, Bob R. et al. | SAE Technical Papers | 2001