Some important papers concerning the studies on rail wear and wheel/rail contact stresses are briefly reviewed. The present paper utilizes a numerical method to analyze the effect of railway vehicle curving on the wear and contact stresses of wheel/rail. The numerical method considers a combination of Kalker's non-Hertzian rolling contact theory, a material wear model and a vertical and lateral coupling dynamics model of the vehicle/track. In the analysis, the important factors influencing on the wear and the contact stresses are, respectively, the curving speed, the curved track super-elevation and the rail cant. Compared to the present model, some concerned models and results in the published papers are in detail discussed. Through the detailed numerical analysis, it is found that the difference between the normal loads of the left and right of the wheelset increases linearly with increasing the vehicle curving speed. The material wear volume per length along the rail running surface has a tendency to grow. However, the variation of the maximum normal contact stress has a large fluctuation as the curving speed increases. The increase of the maximum contact stress depends greatly on not only the normal load but also the profiles of the wheel/rail. Increasing the track super elevation efficiently lowers the normal load difference of the left and right of the front wheelset, and the contact stresses and the wear. The rail cant has a great influence on the low rail wear of the curve track. An increase in rail cant results in a great increase in the low rail wear of the curved track, and a decrease in the outside rail wear. These conclusions are very useful in the maintenance of the track.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    An investigation into the effect of train curving on wear and contact stresses of wheel and rail


    Weitere Titelangaben:

    Eine Untersuchung zum Einfluss von Kurven im Eisenbahnschienennetz auf den Reibverschleiß und die Flächenpressung von Rad und Schiene


    Beteiligte:
    Jin, Xuesong (Autor:in) / Xiao, Xinbiao (Autor:in) / Wen, Zefeng (Autor:in) / Guo, Jun (Autor:in) / Zhu, Minhao (Autor:in)

    Erschienen in:

    Tribology International ; 42 , 3 ; 475-490


    Erscheinungsdatum :

    2009


    Format / Umfang :

    16 Seiten, 45 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    An investigation into effect of train curving on wear and contact stresses of wheel and rail

    Jin, Xuesong / Guo, Jun / Xiao, Xinbiao et al. | Tema Archiv | 2009


    Investigation of contact stresses on the wheel/rail system at steady state Curving

    Knothe, K. / Theiler, A. / Guney, S. et al. | British Library Conference Proceedings | 2000


    Investigation of contact stresses on the wheel/rail-system at steady state curving

    Knothe, K. / Theiler, A. / Gueney, S. | Tema Archiv | 2000


    Curving resistance from wheel-rail interface

    Wu, Qing / Wang, Bo / Spiryagin, Maksym et al. | Taylor & Francis Verlag | 2022


    Efficient Implementation of Wheel Rail Contact Mechanics in Dynamic Curving

    DUFFEK, W. / JASCHINSKI, A. | Taylor & Francis Verlag | 1981