The current paper studies the dynamic behaviour of a coil spring in a vehicle suspension system. A portion of the coil spring is contacted with the top and bottom spring pads. The contact interface is modelled as a set of linear spring elements on the contact nodes of the coil spring. The eigensensitivity analysis is conducted to investigate the frequency variation of the stiffness-coupled system with respect to the contact stiffness variation. In the forced vibration analysis, the transfer function through the coil spring is obtained. The contribution of the coil spring modes to the load transfer is calculated by the modal contribution factor. It is shown that some of the longitudinal and bending vibration modes participate on the load transfer.
Forced vibration analysis for dynamic coupling of finite-element spring-reduced suspension system
2008
8 Seiten, 6 Quellen
Aufsatz (Zeitschrift)
Englisch
Free and forced vibration analysis using the smoothed finite element method (SFEM)
Online Contents | 2007
|Double-spring single-vibration-reduction suspension system
Europäisches Patentamt | 2020
|Suspension Vibration Analysis for Road Noise Using Finite Element Model
SAE Technical Papers | 1999
|FINITE ELEMENT ANALYSIS OF LEAF SPRING AND REAR AXLE FOR REAR SUSPENSION
BASE | 2015
|Vibration Analysis of Drive Line and Suspension Using Finite Element Models
SAE Technical Papers | 1993
|