A conformable airfoil is proposed as an alternative to trailing-edge flaps used for active helicopter vibration reduction through high-frequency changes in camber. The design consists of several compliant mechanisms of predetermined topology that are placed serially within the airfoil along the chord, aft of the leading-edge spar. A shape optimization approach is used to design the compliant mechanisms, in which the objective is to maximize trailing-edge deflection while minimizing airfoil deflections due to aerodynamic loads. Solutions were obtained using a sequential linear programming method coupled with a finite element analysis. An optimized shape is predicted to achieve a trailing-edge deflection of 6.0 mm or a 4.6- deg equivalent flap deflection angle using the tip deflection objective. Results indicate that the deflection is dependent on the amount of passive material allowed and the objective function used. The aerodynamic loads are found to cause only small deformations in comparison with those caused by the actuation. Prototype fabrication and bench-top tests demonstrated that rotor airfoil camber is controllable using the proposed concept.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Design optimization of a controllable camber rotor airfoil


    Weitere Titelangaben:

    Designoptimierung eines Rotorflügels mit steuerbarer Wölbung


    Beteiligte:
    Gandhi, Farhan (Autor:in) / Frecker, Mary (Autor:in) / Nissly, Andrew (Autor:in)

    Erschienen in:

    AIAA Journal ; 46 , 1 ; 142-153


    Erscheinungsdatum :

    2008


    Format / Umfang :

    12 Seiten, 32 Bilder, 2 Tabellen, 22 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    Design Optimization of a Controllable Camber Rotor Airfoil

    Gandhi, Farhan / Frecker, Mary / Nissly, Andrew | AIAA | 2008



    Design Optimization of a Controllable Camber Rotor Airfoil

    Nissly, A. / Anusonti-Inthra, P. / Gandhi, F. et al. | British Library Conference Proceedings | 2005


    Variable camber airfoil system

    SHOME MOUSHUMI / CALKINS FREDERICK T / APDALHALIEM SAHRUDINE | Europäisches Patentamt | 2015

    Freier Zugriff

    Camber Controlled Airfoil Design for Morphing UAV

    Lafountain, Cody / Cohen, Kelly / Abdallah, Shaaban | AIAA | 2009