Two different modelling approaches to predict the microstructure and properties of age hardenable aluminium alloys after non-isothermal heat treatments have been presented. These models have been applied to make predictions for aerospace aluminium alloys joined by friction stir welding. The hardness model is based on a semi-empirical method that requires calibration with data from isothermal heat treatments. A thermal model is used to predict the temperature evolution during the welding process. The model has been shown to give a good prediction of the observed hardness profile, correctly predicting the position of the hardness minimum. The numerical precipitate evolution model is based on the framework of Kampmann and Wagner. Given the temperature profile and initial precipitate parameters, this model predicts how the precipitates evolve. It accounts for transformation of metastable to equilibrium phases, and includes a prediction of both grain boundary and grain interior precipitate distributions. It has been shown that bimodal particle size distributions are predicted to evolve during welding, resulting from the mixture of coarsened particles from the original parent material and new particles formed on post-weld cooling. The model shows that the particle size in the HAZ after welding is sensitive to small changes in peak temperature during the weld cycle. The precipitate evolution model still requires further refinement. However, it already shows promise as a tool to design improved welding practices. Future developments will include linking the microstructural predictions to models for important complex properties such as fracture toughness.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Microstructural modelling for friction stir welding of aluminium alloys


    Beteiligte:
    Robson, J.D. (Autor:in) / Kamp, N. (Autor:in) / Sullivan, A. (Autor:in)


    Erscheinungsdatum :

    2007


    Format / Umfang :

    7 Seiten, 9 Bilder, 1 Tabelle, 16 Quellen




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Friction Stir Welding of Aluminium-Alloys

    Rathod, M.J. / Karale, T.R. | SAE Technical Papers | 2014


    Friction stir welding of automotive aluminium alloys

    Loureiro, A. / Leal, R.M. / Leitao, C. et al. | Tema Archiv | 2007



    Friction stir welding of titanium alloys

    Lauro, A. | Tema Archiv | 2012


    Friction stir welding of aerospace alloys

    Lohwasser, Daniela | Tema Archiv | 2003