Over the last decade, a lot of material and process developments using thermoplastic composites such as LFT, D-LFT and GMT were implemented into automotive applications. Most of them were suitable for high volume semi-structural parts. Small to mid-size volume production cannot economically be realized with these processes due to the high tooling and equipment costs. Anionic Polyamide-6 (APA-6) offers an alternative that allows economic production of structural parts as well as to fulfill the European regulations for recycling. It will be demonstrated that the properties of reactively processed APA-6 are superior to its melt processed counterparts. The reactive processing (vacuum infusion, RTM) of glass fabric reinforced APA-6 is being developed to increase product size/thickness and level of integration of thermoplastic composite parts. The process uses a monomer melt with a water-like viscosity to impregnate a dry fiber pre-form. A catalyst system initiates polymerization at temperatures in the range of 150-180 deg C, which is well below the melting and crystallization point of the final polyamide-6 (PA-6) polymer. As a consequence, solid highly crystalline PA-6 is formed. The simultaneous occurrence of polymerization and crystallization leads to a stiffness far greater than injection molded PA-6 and a strength that even exceeds the strength of PA-6 nano-composites. This in combination with the fact that reactive processing offers the possibility of tailoring the fiber-to-matrix interface clearly shows the potential for this high-performance material. This paper will highlight the potential of this material and process for high-performance structural automotive parts.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Reactively processed Polyamide-6 structural composites for automotive applications


    Weitere Titelangaben:

    Reaktiv verarbeitete Polyamid-6 Strukturverbundwerkstoffe für Fahrzeugeinsatzmöglichkeiten


    Beteiligte:


    Erscheinungsdatum :

    2006


    Format / Umfang :

    8 Seiten, 9 Bilder, 3 Tabellen, 11 Quellen


    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Reactively Processed Polyamide-6 Structural Composites for Automotive Applications

    van Rijswijk, K. / Society of Automotive Engineers | British Library Conference Proceedings | 2006


    Reactively processed polymeric materials for the automotive industry

    Johnson,A. / Univ.of Bradford,GB | Kraftfahrwesen | 1987


    Reactively steered ring antenna array for automotive application

    Sugiura, S. / Iizuka, H. | Tema Archiv | 2007


    MODULAR STRUCTURAL COMPOSITES FOR AUTOMOTIVE APPLICATIONS

    BRANDLEY MARK W / KASMEIER GEORG / HALSBAND ADAM et al. | Europäisches Patentamt | 2021

    Freier Zugriff

    MODULAR STRUCTURAL COMPOSITES FOR AUTOMOTIVE APPLICATIONS

    BRANDLEY MARK W / KASMEIER GEORG / HALSBAND ADAM et al. | Europäisches Patentamt | 2024

    Freier Zugriff