The use of large-diameter line pipe for deep water applications will increase further in the future. The pipe string is not internally pressurised, while being installed on the seabed. As a result, the ambient water exerts heavy external pressure on the pipeline. Line pipe intended for deep water applications has to be designed predominantly with regard to external pressure in order to avoid plastic collapse. As a consequence of cold forming during UOE pipe manufacture and the subsequent application of anticorrosion coating, the characteristic stress strain behavior has to be taken into account for a reliable prediction of the collapse pressure. Verification of collapse resistance of large diameter pipes against external pressure requires adequate and reliable component testing using a sufficient number of pipe samples. These samples have to be subjected to test conditions, which closely simulate the situation in service. As the test results may depend significantly on its boundary conditions, the results needs to be thoroughly analysed and compared with existing prediction methods. It is for these reasons that such full-scale testing is time-consuming and costly. The work presented in this paper aims at clarifying and quantifying the effect of existing test boundary conditions on the results of collapse tests (collapse pressures). Correlations will be established between material properties found in laboratory tests and associated component behavior. In this context it had been necessary to develop an accurate and reproducible compression test method. The actual collapse pressures and those predicted using current available equations are compared and verified by Finite Element calculations. The paper concludes with a discussion of the major findings and with a brief outlook to future research issues.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Methods for collapse pressure prediction of UOE linepipe


    Weitere Titelangaben:

    Methoden der Bruchdruckprädiktion bei UOE-Leitungsrohren


    Beteiligte:


    Erscheinungsdatum :

    2006


    Format / Umfang :

    10 Seiten, 21 Bilder, 1 Tabelle, 10 Quellen



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Linepipe demand surges in China

    Lu, Xiaoming | Tema Archiv | 2001


    Linepipe welding beyond 2000

    Widgery, D.J. | Tema Archiv | 2000


    Girth welding development for X120 linepipe

    Fairchild, D.P. / Macia, M.L. / Bangaru, N.V. et al. | Tema Archiv | 2004


    Allowable strains for high strength linepipe

    Hohl, G.A. / Vogt, G.H. | Tema Archiv | 1992


    Development of high strength linepipe steel

    Yoo, Janq-Yong / Seo, Dong-Han / Ahn, Seong-Soo et al. | Tema Archiv | 2008