Since some years lower alloyed austenitic-ferritic stainless steel grades have been developed, which are summarized in the 'Lean Duplex'-family of alloys. Lean duplex materials have been used so far mainly as plate material for construction of containers and vessels in the pulp and paper business as well as in architecture and construction. As they are lower alloyed in nickel and molybdenum compared to standard duplex grades, lean duplex grades can offer economical interesting advantages combined with a higher degree of technical liability compared to supermartensitic stainless steels. Aim of the present study was to figure out, if lean duplex grades are able to close the gap between supermartensitic steels and standard duplex stainless steels with regards to weldability, structural stability, mechanical properties as well as corrosion behaviour in typical media for the oil and gas industry. Due to the fact, that there are different grades of 'lean' duplex stainless steels commercially available, which significantly differ one from the other in terms of chemical composition, the investigation covered three grades. Plasma/Tungsten Inertgas-, Laser- and Electronbeam-welding have been used for the industrial production of the longitudinal welded pipes made of Uranus 35N, Al 2003 and LDX 2101. The complete characterization of these welds has been carried out according to the Shell and PDO specifications SIEP 97-5763, SP-1095, and SP-1 189. The results have proven the suitability of longitudinally welded pipes made from lean duplex grades for linepipes for sweet and slightly sour service.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Lean duplex grades as longitudinally welded pipes for linepipes in the oil and gas business


    Weitere Titelangaben:

    Längsnahtgeschweißte Rohre aus Lean-Duplex-Stahlgüten für Rohrleitungen im Öl- und Gasgeschäft


    Beteiligte:


    Erscheinungsdatum :

    2005


    Format / Umfang :

    5 Seiten, 6 Bilder, 5 Tabellen



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Weldability assessment of offshore seamless linepipes

    Poli, A. / Anelli, E. / Colleluori, D. et al. | Tema Archiv | 2002


    Longitudinally welded pipes made from FeNi36: the end of the U-bend

    Rommerskirchen, Iris / Nieberg, Lutz / Dreyer, Tobias et al. | Tema Archiv | 2009


    Development of high strength linepipes with excellent deformability

    Okatsu, M. / Ishikawa, N. / Endo, S. et al. | Tema Archiv | 2005


    Fracture toughness properties of two grades of X80 supermartensitic welded pipes

    Deleu, E. / Dhooge, A. / Denys, R. | Tema Archiv | 2000


    Method of strengthening copper steam pipes longitudinally

    Messenger, T. | Engineering Index Backfile | 1899