In recent years requirements have been created, by the FAA, U.S. Air Force, and engine manufacturers, for the ultrasonic inspection of selected in-service engine components. Typically, inspection sensitivities are developed in terms of calibrating to or detecting artificial embedded 'defects' or artifacts such as flat bottom holes (FBHs) or side drilled holes (SDHs). These artifacts are used because they are relatively easy to make, but they impose constraints on attempts to thoroughly evaluate the integrity of inspections. Also, FBHs and SDHs are not very similar to any real embedded defects found in engine alloys. A need exists for new specimens containing embedded artifacts that produce a range of reflectivities, are producible in different sizes, allow interrogation from different angles, are reproducible and relatively inexpensive to make, can be made in large quantities, and can be placed in realistic engine component features. This paper examines the reasons for these artificial defect requirements and makes recommendations for specimens that will allow quantitative assessment of the probability of detection for automated ultrasonic inspections of engine components.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Probability of detection for embedded defects. Needs for ultrasonic inspection of aerospace turbine engine components


    Weitere Titelangaben:

    Wahrscheinlichkeit des Nachweises eingebetteter Fehler. Notwendigkeit der Ultraschallprüfung von Komponenten an Luftfahrtturbinen


    Beteiligte:
    Stubbs, D.A. (Autor:in)


    Erscheinungsdatum :

    2005


    Format / Umfang :

    8 Seiten, 3 Bilder, 4 Tabellen, 12 Quellen





    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Datenträger


    Sprache :

    Englisch




    An automated ultrasonic system for inspection of aircraft turbine engine

    Stubbs, D. / Fiscus, I. / Gasper, D. et al. | Tema Archiv | 2004


    Evaluation of laser ultrasonic inspection of aerospace parts

    Nerenberg, R.L. / Rempt, R.D. / Sorscher, S. et al. | Tema Archiv | 1998


    Laser-based ultrasonic inspection of complexly contoured rocket engine components

    McKie, A.D.W. / Addison, R.C. jun. | Tema Archiv | 1998


    External and internal quality inspection of aerospace components

    Beltran-Gonzalez, Carlos / Bustreo, Matteo / Del Bue, Alessio | IEEE | 2020


    X-ray computed tomography aerospace engine inspection applications

    Craig, D.M. / Girard, D. | Tema Archiv | 2006