JFE Steel has developed a new powder metallurgical process named die-lubricated warm compaction method for producing high-density sintered parts using premixed steel powder containing only small amount of internal lubricant. In this method, a newly developed spraying equipment precisely controls the amount of lubricant applied over the die wall. The sintered and bright-quenched compacts were prepared by this method using partially alloyed steel powder, KIP SIGMALOY 415S, containing 4 mass% Ni, 1.5 mass% Cu, and 0.5 mass% Mo. They gave a density as high as 7.5 Mg/m3 and rotating bending fatigue strengths of 450 MPa and 470 MPa with carbon contents of 0.52 mass% and 0.92 mass% respectively. The density and fatigue strength were superior to those obtained by the conventional double-pressing and double-sintering method. Presumably, the fatigue strength was enhanced by increasing the carbon content because the amount of retained austenite was increased. (Engl. translation from JFE GIHO, 2004, No.4, p.70-76, (jap.))


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Steel powder and die-lubricated warm compaction for automative sintered parts with high density and excellent fatigue property


    Weitere Titelangaben:

    Stahlpulver und das Heißpressverfahren für die gesinterten Fahrzeugteile mit hoher Dichte und mit ausgezeichneten Ermüdungseigenschaften


    Beteiligte:
    Unami, Shigeru (Autor:in) / Ozaki, Yukiko (Autor:in) / Uenosono, Satoshi (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2004


    Format / Umfang :

    8 Seiten, 10 Bilder, 3 Tabellen, 16 Quellen



    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    Forming large automative parts of sheet steel

    Ewald, F.L. | Tema Archiv | 1973


    Automative device

    Europäisches Patentamt | 2018

    Freier Zugriff

    Automative elastomers

    Foster, S.R. / Caporetti, D.R. | Tema Archiv | 1985


    Automative Liquid Level Monitoring

    Vetter,E. / VDO,Schwalbach | Kraftfahrwesen | 1986


    An automative case history

    Schilkey, D. | Tema Archiv | 1983