In this investigation, a new formulation for the wheel/rail contact problem based on the elastic force approach is presented. Crucial to the success of any elastic force formulation for the wheel/rail contact problem is the accurate prediction of the location of the contact points. To this end, features of multibody formulations that allow introducing additional differential equations are exploited in this investigation in order to obtain a good estimate of the rail arc length travelled by the wheel set. In the formulation presented in this paper, four parameters are used to describe the wheel and the rail surfaces. In order to determine the location of the points of contact between the wheel and the rail, a first order differential equation for the rail arc length is introduced and is integrated simultaneously with the multibody equations of motion of the wheel/rail system. The method presented in this paper allows for multiple points of contact between the wheel and the rail by using an optimized search for all possible contact points. The normal contact forces are calculated and used with non-linear expressions for the creepages to determine the creep forces. The paper also discusses two different procedures for the analysis of the two-point contact in the wheel/rail interaction. Numerical results obtained using the elastic force model are presented and compared with the results obtained using the constraint approach.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of elastic force model for wheel/rail contact problems


    Weitere Titelangaben:

    Entwicklung eines Modells zur Beschreibung der Kontaktkräfte zwischen Schiene und Eisenbahnrad unter Berücksichtigung der Elastizität


    Beteiligte:
    Shabana, A.A. (Autor:in) / Zaazaa, K.E. (Autor:in) / Escalona, J.L. (Autor:in) / Sany, J.R. (Autor:in)

    Erschienen in:

    Journal of Sound and Vibration ; 269 , 1+2 ; 295-325


    Erscheinungsdatum :

    2004


    Format / Umfang :

    31 Seiten, 31 Bilder, 3 Tabellen, 15 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch





    Solving conformal wheel-rail rolling contact problems

    Vollebregt,E. / Segal,G. / Delft Univ.of Technol.,NL | Kraftfahrwesen | 2014


    Solving conformal wheel–rail rolling contact problems

    Vollebregt, Edwin / Segal, Guus | Tema Archiv | 2014


    SYSTEM FOR MONITORING A WHEEL-RAIL CONTACT FORCE

    MARTINEZ VICTOR / PINTO ELENA | Europäisches Patentamt | 2021

    Freier Zugriff

    Solving conformal wheel–rail rolling contact problems

    Vollebregt, Edwin / Segal, Guus | Taylor & Francis Verlag | 2014