The effect of Ti/C ratio on oxidation resistance of hot-dip aluminum-coated low C steel sheets has been investigated. Further, a high performance new hot-dip aluminum-coated steel sheet with the same high strength at elevated temperatures as 'HTHS' (High-Temperature High-Strength hot-dip aluminum-coated steel sheet) and the same formability at room temperature as 'HTOR' (High-Temperature Oxidation Resistant hot-dip aluminum-coated steel sheet) is described. The results show that in order to obtain good oxidation resistance, Ti/C ratio must be over 10. In hot-dip aluminum-coated low C steel sheets, Fe-Al alloy layer exfoliates from substrate at a temperature over 600 deg C. Stabilization of solute C by addition of Ti in low C and in ultra low C steels prevents exfoliation of Fe-Al alloy layer at temperatures of over 600 deg C and improves oxidation resistance. Addition of Si and Mn increases strength at room temperature. Addition of Nb instead of Si and Mn is effective to increase tensile strength at elevated temperatures without decreasing elongation at room temperature. Based on the above results, a new high performance hot-dip aluminum-coated IF-steel sheet (ultra-low C, 0.15 % Ti and 0.1% Nb) has been developed, which has excellent oxidation resistance and high strength at elevated temperatures and excellent formability at room temperature.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of high performance hot-dip aluminum-coated IF-steel sheet for automotive exhaust system


    Weitere Titelangaben:

    Entwicklung von hochwertigen feueraluminierten IF-Stahlblechen für das Auspuffsystem von Kraftfahrzeugen


    Beteiligte:
    Fujiwara, S. (Autor:in) / Higo, Y. (Autor:in)


    Erscheinungsdatum :

    2003


    Format / Umfang :

    4 Seiten, 6 Bilder, 5 Tabellen, 7 Quellen



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Development of Aluminum Coated Stainless Steel Sheet - Material for Automotive Exhaust Systems

    Ando, A. / Hattori, Y. / Kittaka, T. et al. | British Library Conference Proceedings | 1992


    Performance of Zn-Al Alloy Coated Steel on Automotive Exhaust Systems

    Sumiya, Jiro / Uchida, Yukio / Hirose, Yusuke | SAE Technical Papers | 1985


    Performance of Zn-Al Alloy coated steel on automotive exhaust systems

    Sumiya,J. / Uchida,Y. / Hirose,Y. et al. | Kraftfahrwesen | 1985


    Organic Coated Steel Sheet for Automotive Body Panel

    Sakai, Hirohiko / Nakamura, Kanji / Miki, Kenji et al. | SAE Technical Papers | 1989


    Organic coated steel sheet for automotive body panel

    Nakamura,K. / Sakai,H. / Miki,K. et al. | Kraftfahrwesen | 1989