Severe loading in a tire/suspension system arises when a rolling tire impacts an obstacle, such as a curb or pothole. Forces and moments at suspension hard points are needed during an impact for component specification, component durability, and endurance analysis. Today, automotive manufacturers and suppliers are promoting virtual prototyping by use of a computer-aided engineering (CAE) tool. CAE consists of a tire model, a suspension model, and a solver for equilibrium equations. The tire models can be classified either by a parametric tire model (PTM) or by a finite element tire model. In the former tire model, tire stiffness is represented by a set of springs; tire forces and moments are estimated by Pajeka equations. This class of tire models is limited to modelling a vehicle's performance, such as ride and handling. In recent years, explicit dynamic modelling of a rolling tire impacting a road imperfection has been used to calculate forces transmitted to a suspension system. The tire model consisted of a single layer of shell elements; solid elements were considered for the tread cap. The beads were not considered in this tire model. In this analysis, ABAQUS Explicit was used to model the rolling and transient impact of a tire. ABAQUS Explicit's modelling results were compared to ABAQUS Standard's results. The comparison included the tire forces, footprint pressure distribution at a free rolling condition, and resonant frequencies. In addition, modelling results of a tire/suspension system traversing an obstacle were presented. The suspension components, except spring and shock, were modelled by rigid elements connected together.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Road load analysis


    Weitere Titelangaben:

    Reifen-Belastungsanalyse auf Basis eines Reifenmodells


    Beteiligte:
    Sobhanie, M. (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2003


    Format / Umfang :

    20 Seiten, 28 Bilder, 2 Tabellen, 5 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    Road Load Analysis

    Sobhanie, M. | Online Contents | 2003


    Dynamic load analysis for vehicle-road systems

    Fangting,Y. / Qun,Y. / Bejing Agricultural Engng.Univ.,CN | Kraftfahrwesen | 1995


    Dynamic Load Analysis for Vehicle-Road Systems

    Fangting, Y. / Qun, Y. / International Society for Terrain Vehicle Systems | British Library Conference Proceedings | 1995


    Road Load Simulation Using Effective Road Profile

    Saleem, F. / Zhou, J. H. / Rui, Yuting | SAE Technical Papers | 1997


    Road Load Simulation Using Effective Road Profile

    Rui, Y. / Saleem, F. / Zhou, J. H. et al. | British Library Conference Proceedings | 1997