In the last decade, offshore pipeline engineering extended its action field to very deep waters and continental slopes. This implies the necessity to deal with continental slopes instability and mass gravity flows. Even if a standard classification of mass gravity flows does not exist in literature, they can be divided in two main different classes having respectively laminar and turbulent regimes. The first class, namely debris flow, is a very dense laminar flow, up to 1800 Kg/m3, with Bingham fluid characteristics. A debris flow could occur on steep slopes with velocity estimated to reach 30 m/s. The main cause of debris flows occurrence is the seismicity. The second class, namely turbidity current, is a turbulent Newtonian flux with density up to 1200 Kg/m3. They are usually associated to debris flows that generate a dense mixture of water and sediment that continues to flow down slope even after the debris flow has stopped. Maximum velocities reached by turbidity currents are of the order of 10 m/s to 15 m/s; they generally last a long time and continue to flow down even on slopes of few degrees. Mass gravity flows are rare and have random occurrence and the direct measurement of the phenomena is practically impossible. This pushed toward the development of physical and numerical models apt to investigate the characteristics and intensity of the phenomena. Two numerical models, one for debris flows, and the other for turbidity currents, are presented. The debris flow model is a two layers model. The turbidity current model is a 2D width-averaged model representing the vertical and downslope co-ordinates. A further diffusion model couples the debris flow model and the turbidity current model, thus allowing the complete simulation of a mass gravity flow starting as a debris flow that flowing down generates a turbidity current. The three models provide an engineering tool for the evaluation of the occurrence of mass gravity flows and their consequences in the design of off-shore structures.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Mass gravity flows modelling


    Beteiligte:
    Drago, M. (Autor:in) / Terenzi, A. (Autor:in)


    Erscheinungsdatum :

    2002


    Format / Umfang :

    5 Seiten, 2 Bilder, 8 Quellen



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Mass-gravity flows pose major hazards for deepwater pipelines

    Reed, C.W. / Niedoroda, A.W. / Forristall, G.Z. et al. | Tema Archiv | 2000



    Modelling Propellers in Inviscid Flows

    Syms, G.F. | Online Contents | 2001


    Modelling flows for efficiency gains

    Ruschel, Andrej | Online Contents | 2010


    Modelling realistic vehicle traffic flows

    Borgiattino, C. / Malandrino, F. / Casetti, C. et al. | IEEE | 2012