The paper introduces a stator-PM, doubly salient; three phase alternator with flux linkage reversal (FRM),% in the stator phases concentrated coils. A diode rectifier and a single IGBT chopper are sized to form a 56 V dc output. The 14 V and 42 V loads are series connected with the car body as neutral point. Two additional IGBTs are used to cancel the neutral current when the load currents in the two power channels differ from each other. Configuration details, FEM field analysis results within a conceptual and then an optimization design and balanced and unbalanced load transients simulations for constant voltage control constitute the core of the paper. They suggest good power density, efficiency, load rejection capacity for speeds from 1800 rpm to 18 krpm, and from 1.5 kW to 3 kW power levels. The paper introduces a stator-PM, doubly salient; three phase alternator with flux linkage reversal (FRM),% in the stator phases concentrated coils. A diode rectifier and a single IGBT chopper are sized to form a 56 V dc output. The 14 V and 42 V loads are series connected with the car body as neutral point. Two additional IGBTs are used to cancel the neutral current when the load currents in the two power channels differ from each other. Configuration details, FEM field analysis results within a conceptual and then an optimization design and balanced and unbalanced load transients simulations for constant voltage control constitute the core of the paper. They suggest good power density, efficiency, load rejection capacity for speeds from 1800 rpm to 18 krpm, and from 1.5 kW to 3 kW power levels.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    The flux reversal machine (FRM) as an automotive alternator with 42/14 V D.C. dual output


    Weitere Titelangaben:

    Umkehr-Magnetflußmaschine für den Einsatz als 42/14 V-Generator im Fahrzeug


    Beteiligte:
    Boldea, I. (Autor:in) / Scridon, S. (Autor:in) / Tutelea, L. (Autor:in) / Lascu, C. (Autor:in) / Muntean, N. (Autor:in)


    Erscheinungsdatum :

    2000


    Format / Umfang :

    8 Seiten, 8 Bilder, 3 Tabellen, 12 Quellen



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Alternator flux shaping

    FRAMPTON ISAAC S / LARSON ADAM | Europäisches Patentamt | 2020

    Freier Zugriff

    Automotive Alternator Load Simulation System

    Topa, I. / Mailat, A. / Croitoru, V. et al. | British Library Conference Proceedings | 1991


    High output alternator concepts

    Bischof,H. / Groeter,H.P. / Schenk,R. et al. | Kraftfahrwesen | 1999


    High Output Alternator Concepts

    Bischof, H. / Groeter, H.-P. / Schenk, R. et al. | British Library Conference Proceedings | 1999


    RECTIFIERS FOR AUTOMOTIVE ALTERNATOR SYSTEMS

    WELTY, J. R. | SAE Technical Papers | 1961