The temperature of a nanosatellite in orbit varies strongly as it goes into Earth shadow or solar radiation. A variable emittance panel built with an electrochromic material, could improve the temperature control by providing an adaptive thermal control. The active function is due to an electrochromic layer, WO3, deposited by sputtering. Intercalation of Li+ leads to a change in the electron configuration, which modulates the radiation properties. Thin WO3 films were deposited onto indium tin oxide (ITO) coated glass by reactive DC sputtering. IR measurements were done in a Perkin-Elmer 983 spectrophotometer. The IR emittance modulation, Delta epsilon of WO3 films, deposited on ITO coated glass, has been investigated. The emittance, epsilon , is computed from the reflectance, at 25 degrees C. Initial results show emittances in the range from 0.2 to 0.5. A crystalline film has Delta epsilon =0.12, and the amorphous film has Delta epsilon =0.3. IR properties of WO3 need to be further investigated as well as the construction of a whole device.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Controlling Variable Emittance (MEMS) Coatings for Space Applications

    Farrar, D. / Schneider, W. / Osiander, R. et al. | NTRS | 2003


    Controlling Variable Emittance (MEMS) Coatings for Space Applications

    D. Farrar / W. Schneider / R. Osiander et al. | NTIS | 2003


    Series emittance coatings

    GRIFFIN, R. | AIAA | 1970



    Methods for increasing IR emittance of thin film second surface mirrored thermal control coatings

    HASEGAWA MARK M / O'CONNOR KENNETH / MILLER GRACE M et al. | Europäisches Patentamt | 2022

    Freier Zugriff