Within the framework of the Joule III project a compact methanol reformer (CMR) with a specific weight of 2 kg/kW (lower heating value of H2) was developed. This CMR contains a methanol and water vaporizer, a steam reformer, a heat carrier circuit and a catalytic burner unit. A laboratory fixed-bed reactor consisting of four tubes which could be filled with different amounts of catalyst was used to investigate the catalyst performance and the ageing behaviour. A hydrogen yield of 10 mN3/(h lCat) can be achieved at 280 degrees C. In this case, the methanol conversion rate is 95% and the dry product gas contains 0.9% CO. A linear decrease of the catalyst activity was observed which can be described by a loss of active catalyst mass of 5.5 mg/h. The catalyst was operated for more than 1000 h without having exhibited activity losses that made a catalyst change necessary. Besides, the stationary behaviour of the reforming reactor, the dynamic behaviour was studied. The time needed for start-up procedures has to be improved for reformers of a next generation. Moreover, the hydrogen production during reformer load changes will be discussed. Simulations of the power train in driving cycles show the different states of a reformer during dynamic operation.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Methanol steam reforming in a fuel cell drive system


    Beteiligte:
    Wiese, W. (Autor:in) / Emonts, B. (Autor:in) / Peters, R. (Autor:in)


    Erscheinungsdatum :

    1999


    Format / Umfang :

    7 Seiten, 20 Quellen




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch






    A 75-kW methanol reforming fuel cell system

    Yan, Xiqiang | Online Contents | 2007


    COPPER-ZIRCONIUM-BASED METHANOL STEAM REFORMING CATALYST

    KLÖTZER BERNHARD / MAYR LUKAS / ARMBRÜSTER MARC et al. | Europäisches Patentamt | 2017

    Freier Zugriff

    Ou- Board Steam- Reforming of Methanol to fuel the automotive hydrogen engine.

    Kestar,F.L. / Konopka,A.J. / Camara,E.H. et al. | Kraftfahrwesen | 1975