The perforation of mild steel, stainless steel and high-strength steel plates subjected to impacts characterised as low-velocity (up to about 20 m/s) and moderate-velocity (20–300 m/s, approximately) are examined in this paper, wherein recent experimental data and some empirical equations have been compared. The threshold velocity for the normal perforation of metal plates focuses on cylindrical projectiles with various shaped impact faces, principally flat. A new criterion is suggested to distinquish between low-velocity and moderate-velocity impacts. Empirical equations are valuable for preliminary design purposes, and are sometimes adequate for final designs. Several empirical equations, which have been developed recently, are examined for their accuracy in estimating the perforation energy of plates in the two impact velocity regimes which have been examined in this article. It is noted that there is a paucity of experimental data when recognising the plethora of parameters which control the perforation of plates. This hinders the development of empirical equations, though surprisingly accurate predictions for perforation velocities are possible to achieve, even for practical problems. Nevertheless, numerical studies are therefore required to remove many of the restrictions on the validity of empirical equations, but these methods require a considerable amount of accurate experimental data on the dynamic material properties and failure criteria.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Impact perforation of steel plates


    Beteiligte:
    Jones, Norman (Autor:in) / Paik, Jeom Kee (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2013-10-01


    Format / Umfang :

    18 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Impact perforation of steel plates

    Jones, Norman | Online Contents | 2013


    High velocity impact of carbon composite plates: Perforation simulation

    Jacquet, E. / Rouquand, A. / Allix, O. | Tema Archiv | 2009



    Modeling and Simulation of Perforation of Steel Plates by Blunt Projectiles

    Voyiadjis, George / Abu Al-Rub, Rashid / Palazotto, Anthony | AIAA | 2006


    AIAA-2006-2089 Modeling and Simulation of Perforation of Steel Plates by Blunt Projectiles

    Voyiadjis, G. / Al-Rub, R. A. / Palazotto, A. et al. | British Library Conference Proceedings | 2006