Abstract This study addresses the shear behavior of rectangular asperities on rock joints to highlight the role of asperity characteristics related to joint shear behavior. The shear strength and failure mode of a rectangular asperity are theoretically derived from force equilibrium analysis, and the relationship between shear strength and shear displacement of a unit asperity is obtained considering shear mechanisms and asperity characteristics. Two failure modes of a rectangular asperity are determined depending on its shape and critical aspect ratio: a dilative failure mode with an inclination of 45-ϕ f /2 and a non-dilative failure mode with shearing of asperity. The range of critical aspect ratio is 0.15 to 0.32 for general rocks. The shear strength of a rectangular asperity is also determined with peak friction angle, cohesion, basic friction angle, aspect ratio, and normal stress. Direct shear tests on artificial joints are performed to verify the theoretical analysis on a rectangular asperity and to explore the effect of asperity size distribution and progressive failure. Based on the analysis on a unit asperity, various effects, such as asperity geometric distribution, normal stress, and specimen size, are discussed in relation to the shear behavior of rock joints.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Shear behavior of rectangular-shaped asperities in rock joints


    Beteiligte:
    Kwon, Tae-Hyuk (Autor:in) / Hong, Eun-Soo (Autor:in) / Cho, Gye-Chun (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    01.05.2010


    Format / Umfang :

    10 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Shear behavior of rectangular-shaped asperities in rock joints

    Kwon, Tae-Hyuk / Hong, Eun-Soo / Cho, Gye-Chun | Springer Verlag | 2010


    Abrasion of rubber model asperities

    Muhr,A.H. / Richards,S.C. | Kraftfahrwesen | 1992


    Lubrication of model asperities on rubber

    Muhr,A.H. / Malaysian Rubber Producers Research Assoc.,GB | Kraftfahrwesen | 1991


    Shear Strength of Rock Joints and Its Estimation

    Son, Moorak | Springer Verlag | 2020


    Triangular Asperities Control Seal Leakage and Lubrication

    Otto, Dennis Lee | SAE Technical Papers | 1974