Abstract Friction stir welding (FSW) is a grand new solid-state bonding process is an emerging surface engineering technology based on the principles of friction stir welding (FSW). Friction stir welding is well-matched joining process for non-ferrous metals in the spacious range of various manufacturing applications for joining materials without material losses to get a top priority of defectless welded joints. In this article, a thickness of 5-mm AA8011 series aluminum alloy plate was coupled by butt joint using two dissimilar tool pin shapes of the straight cylindrical probe and taper pin probe with a consistent parameter of tool revolving speed, welding speed, and downward force of 1400 rpm, 35 mm/min, and 6 kN. The tool pin shapes are the important parameter of material joining process to fix the joint properties, characteristics, quality of weld, and joint strength. The friction stir welding effects are determined after completing the joining process under a various ASTM standard testing methods, such as stiffness distribution in the entire welded zone area and material properties as compared to the base metal with testing results. The crucial tool travel feed is achieved with excellence material joints and extraordinary welded joint properties when collating to a straight cylindrical tool probe. It is identified that the taper pin profile tool offers extensive result was obtained both hardness and tensile strength for to enhance productivity, has been discussed along with the future aspects included in the area of FSW process from this experimental investigation.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Influences of Tool Pin Profiles on Mechanical Properties of Friction Stir Welding Process of AA8011 Aluminum Alloy


    Beteiligte:
    Giridharan, K. (Autor:in) / Jaiganesh, V. (Autor:in) / Padmanabhan, S. (Autor:in)


    Erscheinungsdatum :

    2018-12-21


    Format / Umfang :

    8 pages





    Medientyp :

    Aufsatz/Kapitel (Buch)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Critical Wear Assessment of AA8011/Hybrid Metal Matrix Composites with Surface Amendment Using Friction Stir Process

    Palanivelu, Ramprakash / Ramasamy, Saravanakumar / Ramachandran, Shri Vignesh et al. | SAE Technical Papers | 2019


    Friction stir welding of aluminum alloy to steel

    Kimapong, K. / Watanabe, T. | Tema Archiv | 2004


    Friction stir welding aluminum alloy ship bottom plate

    SUN YINGJIE / CUI GUOCHANG | Europäisches Patentamt | 2022

    Freier Zugriff

    Friction Stir Welding of Aluminum 6082

    Malkapuram, Devaiah / Aadhari, Santhosh | SAE Technical Papers | 2018


    Friction Stir Spot Welding of a High Ductility Aluminum Alloy

    Forsmark, Joy H | SAE Technical Papers | 2014