To study the refractory performance of the axial tensile welded hollow spherical joint, the steady-state test of heating under constant load was carried out on the joint specimens with different load levels. The failure modes, temperature field, displacement-time curves, and refractory performance of the spherical joints exposed to fire are investigated and analyzed. The experimental results indicate that the failure modes of the joints exposed to fire are pull-out failures. The failure location is at the intersection of the steel tube-hollow sphere. The lowest temperature is located at the intersection of the steel tube-hollow sphere. The closer you get to the equator of the hollow sphere, the higher the spherical temperature. The smaller the load level, the higher the refractory temperature and the longer the refractory limit of the joints. The correctness of the numerical model was verified by comparison with the experimental result. Numerical simulations show that with the increase of the load levels, the refractory performance of the joints gradually decreases, and the downward trend gradually slows down. Compared to the refractory temperature code-recommended, the refractory temperature of the tensile joints is very conservative.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Refractory Performance of the Axial Tensile Welded Hollow Spherical Joint


    Weitere Titelangaben:

    KSCE J Civ Eng


    Beteiligte:
    Qiu, Xiaobin (Autor:in) / Huang, Bingsheng (Autor:in) / Song, Haoyu (Autor:in) / Zhang, Zhen (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2023-06-01


    Format / Umfang :

    8 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Experimental Study on the Behavior of Fire Resistance of Welded Hollow Spherical Joint under Compression

    Huang, Bingsheng / Zhang, Yiwei / Zhang, Ranyang et al. | Springer Verlag | 2020


    Welded joint, method for designing welded joint, method for manufacturing welded joint, and hull structure

    ICHIKAWA KAZUTOSHI / SHIMANUKI HIROSHI / OKAWA TEPPEI | Europäisches Patentamt | 2023

    Freier Zugriff

    HOLLOW WELDED ASSEMBLED FRAME STRUCTURE

    KEISUKE KISHIKAWA / HAGIMOTO MASASHI | Europäisches Patentamt | 2016

    Freier Zugriff

    SPHERICAL JOINT

    MACHISUJI KENJI | Europäisches Patentamt | 2017

    Freier Zugriff

    METHOD OF FORMING FILLET ARC WELDED JOINT AND FILLET ARC WELDED JOINT

    TSUCHIYA SHOKO / KODAMA SHINJI / YOSIDA YUUICHI et al. | Europäisches Patentamt | 2017

    Freier Zugriff