Results of numerical investigation of flow and performance characteristics of a rectangular mixed-compression intake with boundary-layer bleed are presented. A flush slot configuration applied at the intake throat has been studied to evaluate its effect on the compression performance. The viscous flowfield has been obtained by solving Favre-averaged Navier–Stokes equations with SST k-ω turbulence model. The analysis has been carried out at a range of freestream Mach numbers of 1.7–2.8 and 0° angle-of-attack, corresponding to a unit Reynolds number of approximately 1.8–3.0 × 107 m−1. The results show that with the use of bleed, the low energy boundary layer and the secondary cross flows are successfully removed near the throat as well as the terminal shock gets stabilized at its entrance. Consequently, the exit flowfield uniformity as well as the critical and peak total pressure recovery improves considerably compared to the intake without bleed system. Furthermore, the critical area-averaged intake exit Mach number reduces by about 0.04 in the complete operating regime. As well as the overall mass capture is found to increase at all operating conditions prior to “unstart because of SWBLI”, since the throat separation bubble is reduced and hence the cowl shock is pushed downstream.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Performance Investigation of a Rectangular Ramjet Intake with Throat Flush Slot Bleed System


    Weitere Titelangaben:

    Lect.Notes Mechanical Engineering


    Beteiligte:


    Erscheinungsdatum :

    2022-07-24


    Format / Umfang :

    27 pages





    Medientyp :

    Aufsatz/Kapitel (Buch)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch