Abstract The paper presents the results of the compressive strength, splitting tensile strength, flexural tensile strength and elastic modulus testing of high strength concrete at 28 and 56 days of maturation, depending on two factors: the portion of 2/16 mm fraction gravel aggregate and the portion of 2/16 mm fraction boiler slag. The analysis and conclusions were justified by the results of laboratory experiments and developed mathematical models describing the dependence of the selected characteristics of the material obtained from the compound composition - the portion of boiler slag and gravel aggregate in the aggregate mix, as well as the observation results of the obtained material microstructure.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    The Possibility of Using Boiler Slag as Coarse Aggregate in High Strength Concrete


    Beteiligte:

    Erschienen in:

    Erscheinungsdatum :

    2017-10-12


    Format / Umfang :

    11 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    The Possibility of Using Boiler Slag as Coarse Aggregate in High Strength Concrete

    Smarzewski, Piotr / Barnat-Hunek, Danuta / Jezierski, Walery | Online Contents | 2018



    Deterioration in Concrete Pavements Constructed with Slag Coarse Aggregate

    Van Dam, Thomas John / Peterson, Karl R. / Sutter, Larry L. et al. | Transportation Research Record | 2003


    Feasibility Study of Antimony Waste Rock Coarse Aggregate High Strength Concrete

    Wang, Jianqun / Li, Bei / Li, Long et al. | TIBKAT | 2021