Abstract Torsion beam rear suspension systems have been widely used in small passenger vehicles. However, welding can lead to local stress concentrations, residual stresses and other various defects, which affects the fatigue life of this system. In this paper, 3D digital image correlation (DIC) technique was used to measure the weld region deformation of a torsion beam rear suspension system in the bench test. The test results show that the obvious strain concentration occurred at the welding seam under the cyclic loading. The numerical simulation work by finite element analysis (FEA) has been done to predict the fatigue damage of the torsion beam rear suspension system. The simulation results show that the location of the fatigue crack was at the strain concentration region in the test work. The enhancement test was performed on a proving ground. The fatigure crack location of the torsion beam rear suspension system in the test automobile was coincident with the results by DIC and FEA. If the load conditions of bench tests are close to the road test, DIC is a useful method to predict the fatigue damage by the strain concentration. As a in lab test it would reduce the cost of fatigue analysis.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Fatigue Analysis of Weld Region in Torsion Beam Rear Suspension System


    Beteiligte:
    Zhan, Nan (Autor:in) / Zhang, Xiaochuan (Autor:in) / Jin, Xulong (Autor:in) / Cao, Hongwei (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2019-03-30


    Format / Umfang :

    7 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Fatigue Analysis of Weld Region in Torsion Beam Rear Suspension System

    Zhan, Nan / Zhang, Xiaochuan / Jin, Xulong et al. | Online Contents | 2019


    TORSION BEAM TYPE REAR SUSPENSION

    AKIMOTO YASUO / MIZUGUCHI TAKEO | Europäisches Patentamt | 2018

    Freier Zugriff

    Automobile rear torsion beam suspension

    RAO YU / HAO XIN / WANG LEYOU et al. | Europäisches Patentamt | 2020

    Freier Zugriff

    TORSION BEAM TYPE REAR SUSPENSION

    SHIMOGUCHI KOKI / MIWA KEISUKE | Europäisches Patentamt | 2019

    Freier Zugriff

    Rigidity-adjustable rear torsion beam suspension

    HU LI / NING CHENXI / CHEN HAI et al. | Europäisches Patentamt | 2022

    Freier Zugriff