Concrete Filled Steel Tubes (CFSTs) with through bolt connections are demonstrated to be satisfactory for seismic performance. Due to better confinement effect, circular CFST columns possess higher strength to weight ratio compared to square CFST. The only limiting factor in application of circular CFST in construction is the difficulty in joining with the beams. This paper presents an experimental study on hysteretic behavior of interior joint between circular CFST column and steel beam using extended end plates with through bolt. The study focuses on the comparison of connection using flat extended end plate with straight bolts and curved extended end plate with split bolt assembly for circular CFST columns. The experimental results were analysed in terms of strength, stiffness, ductility, failure mode and energy dissipation for the evaluation of cyclic performance. The results indicate that the seismic resistance agrees with seismic recommendations of American Institute of Steel Construction (AISC) and the split bolt assembly increases the performance remarkably. For comprehension of mechanism and prediction of shear capacity of the panel zone for curved endplates, a mathematical model was generated. This includes the influence of axial load, prestressing induced by bolt tightening, anchorage and the concrete strut action. The prediction accuracy was compared with the test result and it showed sound correlation.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Hysteresis Performance of Through Bolted Connections in Steel Beam to Circular CFST Column


    Weitere Titelangaben:

    KSCE J Civ Eng


    Beteiligte:
    Ajith, M. S. (Autor:in) / Beena, K. P. (Autor:in) / Sheela, S. (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    01.07.2021


    Format / Umfang :

    14 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Seismic Behavior of Assembly Joint with CFST Column and H-shaped Steel Beam

    Qu, Xiushu / Xie, Yannan / Sun, Guojun et al. | Springer Verlag | 2023



    Application of Component-Based Mechanical Models and Artificial Intelligence to Bolted Beam-to-Column Connections

    Faridmehr, Iman / Nikoo, Mehdi / Pucinotti, Raffaele et al. | BASE | 2021

    Freier Zugriff

    Full scale tests on bolted beam-to-beam endplate connections under bending

    Katula, Levente / Dunai, Lásló | IuD Bahn | 2009