Abstract This paper proposes a new equivalent failure strength model for spot welds under combined axial and shear loading. To evaluate the pure-shear strength of spot welds fabricated under the same welding conditions with a two-layered lap joint, a test fixture and a specimen were newly designed and proposed. The failure tests of spot welds of TRIP590 1.2t, DP780 1.0t, DP780 1.2t, and DP980 1.2t were carried out at seven different loading angles ranging from 0° to 90° at an internal angle of 15° to obtain the failure loads. The failure loads obtained from the experiments were utilized to construct the failure criterion and thus describe the failure behavior of spot welds in the crash analysis or strength analysis of an auto-body. It is noted that the value of β in the failure criterion for spot welds of AHSS is different from the values of conventional steels. The new equivalent failure strength model proposed in this paper was derived from the failure test results to provide a representative failure model that can be used to accurately compare the failure characteristics of different materials under the same conditions.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Prediction of failure characteristics of spot welds of DP and trip steels with an equivalent strength failure model


    Beteiligte:
    Ha, J. (Autor:in) / Huh, H. (Autor:in) / Song, J. H. (Autor:in) / Lim, J. H. (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2013-01-29


    Format / Umfang :

    12 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch





    Prediction of failure characteristics of spot welds of DP and trip steels with an equivalent strength failure model

    Ha, J. / Huh, H. / Song, J. H. et al. | British Library Online Contents | 2013


    Ultimate Strength and Failure Mode of Spot Welds in High Strength Steels

    VandenBossche, D. J. | SAE Technical Papers | 1977


    Effects of failure modes on strength of aluminum resistance spot welds

    Sun,X. / Stephens,E. / Davies,R. et al. | Kraftfahrwesen | 2005


    Effects of Failure Modes on Strength of Aluminum Resistance Spot Welds

    Spinella, Donald J. / Stephens, Elizabeth / Khaleel, Moe et al. | SAE Technical Papers | 2005