Soft robotics is an expanding area of research which exploits compliance and adaptability of soft structures to design highly adaptive robots for contact interactions. The ability to 3D-print materials with softer, more elastic materials properties is a recent development and a key enabling technology for the rapid development of soft robots. Among the possible applications, soft cooperative grippers and manipulators have demonstrated a high potential impact. However, retrieving data about mechanical properties of such novel soft materials and information about the parameters to select in the 3D-printers is often not straightforward. The aim of this chapter is to systematically investigate the mechanical properties of 3D-printed specimens from one of the most used soft filament, the Ninjaflex (Lulzbot, USA). In particular, we focus on the characterization of bending stiffness with reference to the selection of different infill density and printing patterns. We also report on how the collected data can be used in the design phase to obtain a desired behaviour of a soft gripper and on repeatability of the 3D-printing process. Finally, we tested with a finger of a cooperative gripper how the different approaches to obtain a given stiffness value affect the flexion/extension trajectory. This work is intended to be a useful tool for researchers who use rapid-prototyping techniques to develop soft grippers and it also serves as a possible guideline to the characterization of the mechanical properties of novel soft filaments.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    How to 3D-Print Compliant Joints with a Selected Stiffness for Cooperative Underactuated Soft Grippers


    Weitere Titelangaben:

    Springer Proceedings in Advanced Robotics


    Beteiligte:
    Ferraguti, Federica (Herausgeber:in) / Villani, Valeria (Herausgeber:in) / Sabattini, Lorenzo (Herausgeber:in) / Bonfè, Marcello (Herausgeber:in) / Hussain, Irfan (Autor:in) / Iqbal, Zubair (Autor:in) / Malvezzi, Monica (Autor:in) / Prattichizzo, Domenico (Autor:in) / Salvietti, Gionata (Autor:in)

    Kongress:

    International Workshop on Human-Friendly Robotics ; 2019 ; Reggio Emilia, Italy October 24, 2019 - October 25, 2019



    Erscheinungsdatum :

    2020-02-21


    Format / Umfang :

    15 pages





    Medientyp :

    Aufsatz/Kapitel (Buch)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    How to 3D-Print Compliant Joints with a Selected Stiffness for Cooperative Underactuated Soft Grippers

    Hussain, Irfan / Iqbal, Zubair / Malvezzi, Monica et al. | TIBKAT | 2020


    Analysis of Underactuated Mechanical Grippers

    Montambault, Serge | Online Contents | 2001


    Grasping Angle Estimation of Human Forearm with Underactuated Grippers Using Proprioceptive Feedback

    Pastor, Francisco / Gandarias, Juan M. / García-Cerezo, Alfonso J. et al. | TIBKAT | 2020


    Soft Robotics: What Cartesian Stiffness can we obtain with Passively Compliant, Uncoupled Joints?

    Albu-Schäffer, Alin Olimpiu / Fischer, M. / Schreiber, G. et al. | Deutsches Zentrum für Luft- und Raumfahrt (DLR) | 2004

    Freier Zugriff

    Design and evaluation of variable-stiffness robotic grippers

    Cardín Catalán, Daniel | BASE | 2022

    Freier Zugriff