To further study the failure behavior of the rock-like materials containing intermittent fissures subjected to uniaxial compression, 3D printing technology was adopted to manufacture specimens with prefabricated kinked and straight fissures (K-S fissure). The order of average peak strength was −45° > −90° > +90° > +45°. The influence of different parameters, including the effective length and inclination angle of branch fissure, on the coalescence pattern was discussed. Results showed that two failure modes were observed: Model I represented tensile-shear composite failure in the rock bridge area, while Model II showed non-coalescence occurring. The effective length parameter presented a relatively larger influence than the inclination angle on the failure behavior. Additionally, Model I was discovered to tend to occur in the rock bridge region when the branch fissure turned anticlockwise. Based on numerical simulation using the Realistic Failure Process Analysis (RFPA2D), a quick damage criterion approach was proposed to estimate the coalescence behavior in the rock bridge, which was beneficial to determine coalescence pattern and failure behavior. Based on the curve fitted by the simulation, the coalescence pattern of cracks initiated from pre-existing intermittent fissures occurs in the tensile-shear composite fracture pattern, while non-coalescence occurs in the rock bridge below the curve.
Numerical Simulation of the Coalescence Behavior of Intermittent Structures with Fissures
KSCE J Civ Eng
KSCE Journal of Civil Engineering ; 27 , 4 ; 1720-1731
01.04.2023
12 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Engineering Index Backfile | 1916
Engineering Index Backfile | 1937
|Engineering Index Backfile | 1937
|