Micropile is vulnerable to lateral load due to the small diameter configuration. Inclusion of a steel casing can be an effective option to enhance the lateral load capacity of micropile, yet not quantified in detail. In this study, the reinforcing effect of casing for laterally loaded micropile is investigated considering the inclined condition of micropile. A series of the finite element analysis were performed to simulate laterally loaded micropiles for various configuration conditions. The maximum bending moment (Mmax) and its location (Zmax) became smaller and shallower, respectively, when micropile was inclined at an angle of θ, which is advantageous in design. For micropile with a casing, the lateral load capacity (Hu) increased as casing length (Lc) increased, and the effect of θ was similar for all cases with different length ratios of casing and micropile (i.e., Lc/Lp). Hu increased by 50% to 60% for Lc/Lp of 0 to 0.3, respectively. For Lc/Lp > 0.3, the values of both Hu and Mmax did not change significantly for all θs. Therefore, Lc/Lp = 0.3 was proposed as an optimum casing length that yields the most economical yet most enhanced stability condition. A design equation was proposed to estimate the lateral load capacity of inclined micropiles with a casing.
Characterizing Optimum Casing Configuration for Laterally Loaded Micropiles with Inclined Condition
KSCE J Civ Eng
KSCE Journal of Civil Engineering ; 26 , 9 ; 3776-3788
2022-09-01
13 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
The improvement of railway embankment with micropiles
British Library Conference Proceedings | 2011
|Laterally Loaded Non-Uniform Struts
Emerald Group Publishing | 1953
|Imrovement of loose sandy soil deposits using micropiles
Online Contents | 2012
|