Efforts have resumed to improve the image quality of infrared imaging bundles formed at AMI using the ribbon stacking method. The C4 glass has been used to reduce core size, increase packing density and improve flexibility. Ribbons are formed from unclad fiber wound on a drum with pitch, ribbon count and spacing between ribbons computer controlled. A small portion of each ribbon is compressed and fused using thin, dilute Epoxy. Unfortunately, the Epoxy, serving as a clad, absorbs most all the LWIR energy making the bundles unsuited for 8-12 μm cameras. The ribbons are removed from the drum and stacked, one on top of the other observing proper orientation to form the bundle. A typical 1 meter bundle is formed from 50-70 count ribbons for a total of 2500-4900 fibers, made from 2.5-4.9 Km of C4 fiber. Typical core diameters are 60-80 μm. Active surface area ranges from 60-70%. Infrared resolution images formed using a NIR tube camera equipped with a special relay lens demonstrates the resolution limit for the bundle. Currently, the limit is about 10 lp/mm. The bundle end is imaged in the 3-5 μm Agema 210 camera using an Amtir 1 F/1 meniscus, coated 3-5 μm. Video images taken in natural light of an individual, easily recognizable at 50 feet, will be shown. Results of careful evaluation carried out at Lockheed Martin in Orlando using a high performance Raytheon Galileo camera will be presented.
Infrared imaging with fiber optic bundles
Infrared Technology and Applications XXIX ; 2003 ; Orlando,Florida,United States
Proc. SPIE ; 5074
2003-10-10
Aufsatz (Konferenz)
Elektronische Ressource
Englisch
Infrared imaging bundles with good image resolution
SPIE | 2001
|PHOTONIC TECH BRIEFS - Robust Mapping of Incoherent Fiber-Optic Bundles
Online Contents | 2007
Confocal microscopy using optical fiber imaging bundles
SPIE | 1996
|