In this paper, we study the suspension performances with an adaptive inerter under the assumption that the inertance may be adjusted in real-time. A quarter-car model with an inerter installed in parallel with a spring and a damper is considered. First, for a given suspension system, a study of the effects of using a fixed inerter is provided. It shows the difficulty in choosing a fixed inerter to satisfy the vehicle performances at the sprung mass natural frequency without deteriorating significantly at the unsprung mass natural frequency. Then, a state-feedback H 2 controller for an active suspension system is designed. The active force is approximated by an inerter with adjustable inertance. Ride quality, suspension deflection and tyre deflection performances are considered independently as the prime objective. Simulation results show that comparing with the passive suspension with fixed inerter, for ride quality and tyre deflection, the suspension with adaptive inerter can achieve improvement at the sprung mass natural frequency at the expense of a relatively small deterioration at the unsprung mass natural frequency. For suspension deflection, a better performance can be achieved at high frequencies with almost no loss of performance at other frequencies. This method is easier to implement in practice than the optimized passive suspension with a fixed inerter, which calls for complicated layout.
Control of vehicle suspension using an adaptive inerter
2015-12-01
10 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Control of vehicle suspension using an adaptive inerter
Online Contents | 2015
|Investigation on semi-active control of vehicle suspension using adaptive inerter
BASE | 2014
|Inerter suspension mechanism and inerter suspension mechanism simulation method
Europäisches Patentamt | 2023
|Impact of inerter nonlinearities on vehicle suspension control
Taylor & Francis Verlag | 2008
|