Locomotive wheel wear and rolling contact fatigue simulations that consider both train dynamics and detailed traction control systems have not been reported. This paper developed a parallel co-simulation method to link an in-house longitudinal train dynamics simulator to a commercial software package named GENSYS. An advanced longitudinal train dynamics model, a traction control system model and a wheel–rail contact model were then incorporated into the simulation. Three wear calculation models (T-gamma model, USFD model and Archard model) and two rolling contact fatigue calculation models (T-gamma-based rolling contact fatigue model and shakedown-based rolling contact fatigue model) were implemented. A train with the configuration of 1 locomotive +54 wagons +1 locomotive +54 wagons was simulated. This paper shows that the simulation method is successful and can be used for such more detailed locomotive wheel wear and rolling contact fatigue calculations. Wear and rolling contact fatigue calculation results show that the wear numbers that were calculated using the T-gamma wear model and damage indexes that were calculated using the T-gamma-based rolling contact fatigue model were similar between the leading and remote locomotives. However, wear rates that were calculated using the USFD wear model, wear volumes that were calculated using the Archard model and fatigue indexes that were calculated using the shakedown-based rolling contact fatigue model have evident differences between the leading and remote locomotives. Maximum differences in these results were about 12, 18 and 34%, respectively.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Parallel co-simulation of locomotive wheel wear and rolling contact fatigue in a heavy haul train operational environment


    Beteiligte:
    Wu, Qing (Autor:in) / Spiryagin, Maksym (Autor:in) / Sun, Yan (Autor:in) / Cole, Colin (Autor:in)


    Erscheinungsdatum :

    01.02.2021


    Format / Umfang :

    13 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Heavy Haul Coal Car Wheel Load Environment: Rolling Contact Fatigue Investigation

    Cakdi, Sabri / Cummings, Scott / Punwani, John | British Library Conference Proceedings | 2015


    Wheel-rail contact wear analysis on curved lubricated track for heavy haul locomotive studies

    Sun, Yan Quan / Spiryagin, Maksym / Wu, Qing et al. | SAGE Publications | 2024


    Heavy haul train locomotive dynamics monitoring device

    WANG HONGQIANG / YANG HONG / WANG YUAN et al. | Europäisches Patentamt | 2020

    Freier Zugriff

    Wheel/Rail Wear by Heavy Haul Combined Train Operation

    Yu, Z. / Lian, J. / Li, F. et al. | British Library Conference Proceedings


    Influence of wheel polygonal wear on wheel-rail dynamic contact in a heavy-haul locomotive under traction conditions

    Liang, Hongqin / Liu, Pengfei / Wang, Tianlong et al. | SAGE Publications | 2021