A finite element (FE) model of wheel‒rail frictional heating with moving heat source is proposed in this paper for estimating the wheel‒rail contact temperature distributions under repeated long-term operation. To calculate the temperature rise in wheel‒rail friction, this study compares the computational accuracy and efficiency of the temperature field generated by the moving heat source method and the thermo-mechanical coupling method. A three-dimensional transient wheel‒rail rolling contact thermo-mechanical coupling finite element model is established using ANSYS/LSDYNA software. The moving heat source method is conducted through ANSYS transient thermal analysis with a time step of 2.57 × 10−5 s, meeting the thermal analysis requirements. Taking into account the influence of complex operating conditions and the third medium between the wheel and rail, this study compares and analyzes the two methods under different wheel–rail creepage conditions. The following conclusions were drawn: as creepages increase, the wheel tread surface temperature increases approximately linearly, with the temperature calculated by the moving heat source method being larger. The temperature difference between the two methods gradually increases, and the maximum temperature value difference is 4.9%, which is less than 5%. The moving heat source approach can save approximately 20 times the computational time. Considering both calculation time and efficiency, the moving heat source method can be employed as an alternative to the three-dimensional transient wheel‒rail rolling contact thermo-mechanical coupling finite element method. This study provides theoretical support and a finite element model reference for the calculation of wheel‒rail friction temperature rise.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Comparative analysis of wheel‒rail frictional temperature rise using moving heat source and thermo-mechanical coupling methods at various wheel‒rail creepages


    Beteiligte:
    Zhang, Jinyu (Autor:in) / Tao, Gongquan (Autor:in) / Wen, Zefeng (Autor:in)


    Erscheinungsdatum :

    01.03.2025




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    MOVING BEYOND WHEEL-RAIL

    Online Contents | 1997


    Thermo-mechanical finite element analysis of a rail wheel

    Ramanan, L. / Kumar, R.K. / Sriraman, R. | Tema Archiv | 1999


    Comparative evaluation of various rail-wheel lubrication strategies

    Chattopadhyay, G. / Reddy, V. / Hargreaves, D. et al. | Tema Archiv | 2004


    Urban rail wheel steel and urban rail wheel prepared by using urban rail wheel steel

    ZHANG XIAOFENG / LI SHULIN / JIA TUOSHENG et al. | Europäisches Patentamt | 2020

    Freier Zugriff

    Wheel-rail type guide moving device

    CHEN RUIXIANG / ZHAO XU / ZENG CHUIGANG et al. | Europäisches Patentamt | 2021

    Freier Zugriff