The use of high-velocity sheet-forming techniques where the strain rates are in excess of 102/s can help us solve many problems that are difficult to overcome with traditional metal-forming techniques. In this investigation, thin metallic plates/foils were subjected to shock wave loading in the newly developed diaphragmless shock tube. The conventional shock tube used in the aerodynamic applications uses a metal diaphragm for generating shock waves. This method of operation has its own disadvantages including the problems associated with repeatable and reliable generation of shock waves. Moreover, in industrial scenario, changing metal diaphragms after every shot is not desirable. Hence, a diaphragmless shock tube is calibrated and used in this study. Shock Mach numbers up to 3 can be generated with a high degree of repeatability (±4 per cent) for the pressure jumps across the primary shock wave. The shock Mach number scatter is within ±1.5 per cent. Copper, brass, and aluminium plates of diameter 60 mm and thickness varying from 0.1 to 1 mm are used. The plate peak over-pressures ranging from 1 to 10 bar are used. The midpoint deflection, circumferential, radial, and thickness strains are measured and using these, the Von Mises strain is also calculated. The experimental results are compared with the numerical values obtained using finite element analysis. The experimental results match well with the numerical values. The plastic hinge effect was also observed in the finite element simulations. Analysis of the failed specimens shows that aluminium plates had mode I failure, whereas copper plates had mode II failure.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Theoretical–experimental study of shock wave-assisted metal forming process using a diaphragmless shock tube


    Beteiligte:
    Nagaraja, S R (Autor:in) / Prasad, J K (Autor:in) / Jagadeesh, G (Autor:in)


    Erscheinungsdatum :

    2012-12-01


    Format / Umfang :

    10 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Unbekannt






    Diffraction and Focusing of Toroidal Shock Wave Discharged from a Compact Vertical Diaphragmless Shock Tube

    Hosseini, S. H. R. / Takayama, K. | British Library Conference Proceedings | 2000


    PRELIMINARY STUDY ON DIAPHRAGMLESS SHOCK TUBE FOR TRANSONIC AIRFOIL TESTING WITH PDI

    Kashitani, M. / Yamaguchi, Y. / Oki, G. et al. | British Library Conference Proceedings | 2010


    Development of a Diaphragmless, Miniature, Liquid-Piston Shock Tube (AIAA 2017-2010)

    McCormack, Rhys | British Library Conference Proceedings | 2017