A new variable mode valve actuation system for a heavy-duty engine was proposed and designed in this paper. The variable mode valve actuation system can significantly enhance braking safety and improve fuel economy and emission of heavy-duty engines through flexible switching among four-stroke driving mode, two-stroke compression-release braking mode, and cylinder deactivation mode on a conventional four-stroke engine. The switching was controlled by four-stroke driving modules and two-stroke braking modules, both of which have two operation states: effective state and failure state. For the control of the multi-cylinder engine, all cylinders can be divided into several groups, and all the four-stroke driving modules in the same group were controlled by one solenoid valve, as well as all the two-stroke braking modules were controlled by another solenoid valve. A hydraulic-mechanical multi-body dynamics model was established to investigate the switching response of the variable mode valve actuation system. The results indicated that when the engine operated at 2000 r/min, the switching of the four-stroke driving module and the two-stroke braking module required 30 °CA and 101 °CA at most, respectively. In addition, to avoid the conflict between the four-stroke driving valve lift and the two-stroke braking valve lift, the switching between the four-stroke driving mode and the two-stroke compression-release braking mode must have a reasonable sequence. The variable mode valve actuation system has an excellent switching response and it is convenient for the control of the multi-cylinder engine. Therefore, the variable mode valve actuation system has a good application prospect for heavy-duty engines.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of a variable mode valve actuation system for a heavy-duty engine


    Beteiligte:
    Wang, Yang (Autor:in) / Long, Wuqiang (Autor:in) / Cui, Jingchen (Autor:in) / Tian, Hua (Autor:in) / Meng, Xiangyu (Autor:in) / Wang, Xin (Autor:in) / Xu, Duo (Autor:in)


    Erscheinungsdatum :

    01.09.2020


    Format / Umfang :

    16 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Development and implementation of variable valve actuation system to a heavy-duty diesel engine

    Gehrke,S. / Weiskirch,C. / Eilts,P. et al. | Kraftfahrwesen | 2008


    Full-Load HCCI Operation with Variable Valve Actuation System in a Heavy-Duty Diesel Engine

    Nishizawa, Izumi / Sato, Norihiko / Iijima, Tadashi et al. | SAE Technical Papers | 2007


    Full-load HCCI operation with variable valve actuation system in a heavy-duty diesel engine

    Kodama,Y. / Nishizawa,I. / Sugihara,T. et al. | Kraftfahrwesen | 2007


    Full-Load HCCI Operation with Variable Valve Actuation System in a Heavy-Duty Diesel Engine

    Kodama, Y. / Nishizawa, I. / Sugihara, T. et al. | British Library Conference Proceedings | 2007