As the number of unknowns in trim analysis increases, the problem becomes more complicated, and traditional methods begin to fail. Common problems with conventional methods may be an ill-conditioned matrix, rounding errors, and division by zero. Furthermore, these methods are likely to find the local optimum, not the global optimum. In such cases, hybrid use with intelligent methods such as genetic algorithms is recommended. In this study, a flight situation that the Newton–Raphson method has for difficulty in solving is selected for a six-degree-of-freedom nonlinear trim analysis. Trim analysis was performed using the Newton–Raphson method, genetic algorithm, and by their hybrid use, respectively. The Newton–Raphson method had convergence problems despite very good initial guesses. The genetic algorithm was able to solve the same problem by itself. The unknowns in trim analysis, such as deflection angles of an elevator, a rudder, and an aileron, have physical limits, whereas the constraints make conventional methods more complicated, and the ability to use these limits in the genetic algorithm narrows the solution space and reduces the computation time. The hybrid use of the GA and Newton–Raphson method significantly increased the performance of the Newton–Raphson method and eliminated the convergence problem. It has been shown that a 6-degree-of-freedom trim problem, which traditional numerical methods such as the Newton–Raphson method have for difficulty in solving, can be solved easily and effectively with the hybrid use of the GA and the Newton–Raphson method. The strength of the proposed hybrid method to solve a highly nonlinear trim problem was demonstrated.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Comparison of the Newton–Raphson Method and genetic algorithm solutions for nonlinear aircraft trim analysis


    Beteiligte:
    Ozdemir, Ugur (Autor:in)


    Erscheinungsdatum :

    2023-03-01


    Format / Umfang :

    16 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    NEWTON-RAPHSON METHODS IN AIRCRAFT TRIM: A COMPARATIVE STUDY

    Millidere, Murat / Karaman, Ugur / Uslu, Samet et al. | TIBKAT | 2020


    Further Investigations on Newton-Raphson Methods in Aircraft Trim

    Millidere, Murat / Karaman, Ugur / Balli, Hakan et al. | AIAA | 2021


    Newton-Raphson Methods in Aircraft Trim: A Comparative Study

    Millidere, Murat / Karaman, Ugur / Uslu, Samet et al. | AIAA | 2020


    FURTHER INVESTIGATIONS ON NEWTON-RAPHSON METHODS IN AIRCRAFT TRIM

    Millidere, Murat / Karaman, Ugur / Balli, Hakan et al. | TIBKAT | 2021