Polarized wire grid has been used as a low-energy polarization separator in many calibration systems. A novel machine was developed for winding the polarized wire grids with different sizes and shapes. In this paper, the process of design including parameters calculation, structural analysis, and the calibration for the winding device is presented. Finally, taking an oval grid as an example, the fabrication and the testing results is shown. A 250 mm×350 mm oval polarized wire grid is fabricated by using this machine, with 0.1 mm diameter molybdenum wires at the distance of 0.3 ± 0.02 mm. And it achieved the 01. mm flatness requirement. The machine used is robust and can be easily extended to even 200 × 200 mm2 – 500 mm × 500 mm grids with 0.08–0.2 mm diameter wires at the distance of 0.1–0.5 mm.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A winding machine for polarized wire grid of microwave radiometer calibration


    Beteiligte:
    Hu, Yong (Autor:in) / Shen, Xin (Autor:in) / Hu, Ye (Autor:in) / Wang, Maosen (Autor:in) / Zhang, Qichao (Autor:in) / Zou, Qing (Autor:in) / Li, Bin (Autor:in)


    Erscheinungsdatum :

    01.04.2019


    Format / Umfang :

    10 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Temperature reference for microwave radiometer calibration

    Love, A. W. / Vanmelle, M. J. / Jones, A. C. et al. | NTRS | 1977


    Tipping calibration method for K-band hyperspectral microwave radiometer

    Yan, X. / Jingxiong, C. / Jungang, M. | British Library Online Contents | 2014


    TOPEX/Poseidon Microwave Radiometer Performance and In-Flight Calibration

    Liu, T. / Janssen, M. / Subramanya, B. et al. | NTRS | 1993


    Simplified Microwave Radiometer

    Gary, Bruce L. | NTRS | 1988


    Calibration Report ASD/ENVED Radiometer

    H. S. Shepherd / S. Geiser | NTIS | 1972