Φ-sensitivity is a fuel characteristic that has important benefits for the operation and control of low-temperature gasoline combustion (LTGC) engines. A fuel is φ-sensitive if its autoignition reactivity varies with the fuel/air equivalence ratio (φ). Thus, multiple-injection strategies can be used to create a φ-distribution that leads to several benefits. First, the φ-distribution causes a sequential autoignition that reduces the maximum heat release rate. This allows higher loads without knock and/or advanced combustion timing for higher efficiencies. Second, combustion phasing can be controlled by adjusting the fuel-injection strategy. Finally, experiments show that intermediate-temperature heat release (ITHR) increases with φ-sensitivity, increasing the allowable combustion retard and improving stability.A detailed mechanism was applied using CHEMKIN to understand the chemistry responsible for φ-sensitivity. For fuels with NTC behavior, φ-sensitivity is greatest in the NTC region due to enhanced ITHR reactions, which explains the experimental correlation between φ-sensitivity and ITHR. Under engine conditions, higher intake pressure means lower intake temperature to balance the reactivity, and both effects increase the φ-sensitivity. However, φ-sensitivity remains almost constant if decreased oxygen concentration is used to control the reactivity increase with intake-pressure boost because pressure and oxygen have opposite effects. Finally, for fuels without an NTC region, φ-sensitivity is lower and almost constant as operating conditions vary.The potential of designing fuel blends that increase the φ-sensitivity compared to RD5-87 (regular E10 gasoline), while maintaining high RON and octane-sensitivity, was investigated. Higher φ-sensitivity and higher RON than RD5-87 can be reached with a 5-component blend that meets U.S. regulations. The fuel mixture is composed of a combination of 1-hexene, n-pentane, iso-octane, p-xylene and iso-butanol (which was recently approved for gasoline in the U.S.). This study shows that it is possible to have both high φ-sensitivity and high RON with high octane-sensitivity.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Φ-Sensitivity for LTGC Engines: Understanding the Fundamentals and Tailoring Fuel Blends to Maximize This Property


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Lopez Pintor, Dario (Autor:in) / Gentz, Gerald (Autor:in) / Dec, John (Autor:in)

    Kongress:

    WCX SAE World Congress Experience ; 2019



    Erscheinungsdatum :

    2019-04-02




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Refining Measurement Uncertainties in HCCI/LTGC Engine Experiments

    Petitpas, Guillaume / Dernotte, Jeremie / Dec, John et al. | SAE Technical Papers | 2018


    Mixture Stratification for CA50 Control of LTGC Engines with Reactivity-Enhanced and Non-Additized Gasoline

    Lopez Pintor, Dario / Gentz, Gerald / Dec, John | SAE Technical Papers | 2021



    A Framework for Quantifying Measurement Uncertainties and Uncertainty Propagation in HCCI/LTGC Engine Experiments

    Petitpas, Guillaume / McNenly, Matthew J. / Whitesides, Russell A. | SAE Technical Papers | 2017


    Fuel Blends in Compression Ignition Engines

    Asfar, Khaled / Al-Rabadi, Thaer | AIAA | 2003