Sound attenuation and flow loss reduction are often two competing demands in vehicle breathing systems. The present study considers a full vehicle exhaust system and investigates both the sound attenuation and the flow performance of production configurations including the catalyst, the resonator, and the muffler. Dynamometer experiments have been conducted with a firing Ford 3.0L, V-6 engine at wide-open throttle with speeds ranging from 1000 to 5000 rpm. Measurements including the flow rates, the temperatures and the absolute dynamic pressures of the hot exhaust gases at key locations (upstream and downstream of every component) with fast-response, water-cooled piezo-resistive pressure transducers facilitate the calculation of acoustic performance of each component, as well as the determination of flow losses caused by these elements and their influence on the engine performance. The present study describes the experimental aspects of an ongoing effort towards employing nonlinear fluid dynamic models in the time-domain for the prediction of the acoustic and power performance of firing internal combustion engines with full production exhaust systems.
The Effect of Vehicle Exhaust System Components on Flow Losses and Noise in Firing Spark-Ignition Engines
Sae Technical Papers
SAE Noise and Vibration Conference and Exposition ; 1995
1995-05-01
Aufsatz (Konferenz)
Englisch
British Library Conference Proceedings | 1995
|Air-assisted direct firing for spark-ignition engines
Kraftfahrwesen | 2009
|Exhaust gas ionization sensor for spark ignition engines
Kraftfahrwesen | 1988
|Engineering Index Backfile | 1943
|