In the most elementary treatment of plane-wave reflection at the open end of a duct system, it is often assumed that the ends are pressure nodes. This implies that pressure is assumed as a constant at the open end termination and that steady flow boundary condition is supposed as instantaneously established. While this simplifying assumption seems reasonable, it does not consider any radiation of acoustic energy from the duct into the surrounding free space; hence, an error in the estimation of the effects of the flow on the acoustical response of an open-end duct occurs. If radiation is accounted, a complicated three-dimensional wave pattern near the duct end is established, which tends to readjust the exit pressure to its steady-flow level. This adjustment process is continually modified by further incident waves, so that the effective instantaneous boundary conditions which determine the reflected waves depend on the flow history. In this work, a theoretical model to compute the reflected wave on the flow history is proposed. The model has been implemented as a boundary condition in a 1D thermo-fluid dynamic code for internal combustion engine simulation and it has been validated over a set of measurements, that were carried out on an experimental test rig for a variety of engine-like flow conditions.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Modeling of Pressure Wave Reflection from Open-Ends in I.C.E. Duct Systems


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE 2010 World Congress & Exhibition ; 2010



    Erscheinungsdatum :

    2010-04-12




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Modeling of pressure wave reflection from open-ends in internal combustion engine duct systems

    Piscaglia,F. / Montorfano,A. / Onorati,A. et al. | Kraftfahrwesen | 2010


    Thermo-Hydraulic Oil Loop Modeling for I.C.E. Warm-Up Investigation

    Champoussin, J. C. / Jarrier, L. / Gyan, Ph. | SAE Technical Papers | 2002


    On the thermal fields of I.C.E. cylinder liners

    Cipollone,R. / Univ.of l Aquila,IT | Kraftfahrwesen | 1990


    On the Thermal Fields of I.C.E. Cylinder Liners

    Cipollone, Roberto | SAE Technical Papers | 1990


    Vehicles and components seen at I.C.E. 84 and elsewhere

    Escaro,ZF,Scania,MF,Fiat,Carraro,Lucas | Kraftfahrwesen | 1984