Diesel engines generally tend to produce a very low level of NOx and soot through the application of Miller Cycle, which is mainly due to the low temperature combustion (LTC) atmosphere resulting from the Miller Cycle utilization. A CFD model was established and calibrated against the experimental data for a part load operation at 3000 r/min. A designed set of Miller-LTC combustion modes were analyzed. It is found that a higher boost pressure coupled with EGR can further tap the potential of Miller-LTC cycle, improving and expanding the Miller-LTC operation condition. The simulated results indicated that the variation of Miller timings can decrease the regions of high temperatures and then improve the levels and trade-off relationship of NOx and soot. The in-cylinder peak pressure and NOx emissions were increased dramatically though the problem of insufficient intake charge was resolved by the enhanced intake pressure that is equivalent to dual-stage turbo-charging. In addition, the positive effect of EGR can overwhelm the side effect of a high intake pressure on the in-cylinder peak pressures and NOx emissions, mitigating the mechanical load of diesel engines and improving the emission levels. Therefore the operation range of Miller-LTC cycle diesel engines was expanded to high load conditions, and the adaptability to variable operating conditions was enhanced through the optimization of Miller timings, high intake pressures and EGR ratios. However, the amount of BSFC in these cases couldn't be involved in this paper.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Achievement of Diesel Low Temperature Combustion through Higher Boost and EGR Control Coupled with Miller Cycle


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Zhao, Changpu (Autor:in) / Shang, Fang (Autor:in) / Yu, Gang (Autor:in) / Yang, Junwei (Autor:in) / Bai, Man (Autor:in)

    Kongress:

    SAE 2015 World Congress & Exhibition ; 2015



    Erscheinungsdatum :

    2015-04-14




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch





    Insulated Miller Cycle Diesel Engine

    Reid, Michael / Mavinahally, Nagesh / Kamo, Roy et al. | SAE Technical Papers | 1996


    A new type of miller-cycle diesel engine

    Sakai,H. / Koizumi,N. / Watanabe,I. et al. | Kraftfahrwesen | 1988


    Miller-PCI Combustion Concept for Lowering Diesel Emissions

    Murata, Y. | British Library Conference Proceedings | 2006


    Miller-PCCI Combustion in an HSDI Diesel Engine with VVT

    Kawano, Daisuke / Ishii, Hajime / Suzuki, Hisakazu et al. | SAE Technical Papers | 2008