It is easy to identify flow induced noise on a flow bench or engine testing, but it is also equally essential to understand the fundamental mechanisms of fan noise generations. A methodology for optimizing cooling fan noise using 3-D CFD technique is presented in this paper. This work is an extension of Reference Nain, A. [2], where cooling fan dimensions like blade shape, number of blades, blade diameter etc. are optimized for achieving fuel efficiency targets. Any design modification in a fan should also be validated for any cause of noise generation. Initially engine noise sources are identified experimentally in anechoic chamber. Each noise source is categorized in order of their dominance on overall noise level. The cooling fan system impact is also extracted from overall noise spectrum. Then, a complete 3-D CFD simulation model is prepared which consists of fan impeller, fan shroud, top bracket and cylinder liner and sources of broad-band flow noise between 1.0 kHz - 5 kHz is obtained. The noise sources are captured by placing pressure probes around the outer periphery, center of cooling fan inlet and in-between fan/cylinder liner. These pressure signals are FFT processed and sound pressure level is obtained. SPL data confirm that fan outer periphery and fan/liner region shows dominant source as blade passing frequency and broad band noise in 1.0 kHz - 5 kHz frequency region. The sound pressure levels between base cooling system configuration and optimized cooling system configuration is compared and observed low dominance of broad band noise. The optimized system is again verified on genset/canopy level and observed average 1.5 dB (A) noise level reduction for all engine load points.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Cooling Fan Noise Reduction of Air-Cooled Diesel Engine by Engine Tests and Simulations


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Nain, Ajay (Autor:in)

    Kongress:

    WCX SAE World Congress Experience ; 2020



    Erscheinungsdatum :

    2020-04-14




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Combustion Noise Analysis of Premixed Diesel Engine by Engine Tests and Simulations

    Shibata, Gen / Ogawa, Hideyuki / Ushijima, Hirooki et al. | SAE Technical Papers | 2014


    Air-cooled railcar diesel engine

    Koffman, J.L. | Engineering Index Backfile | 1949


    Noise Reduction of Automotive Diesel Engine Using Engine Enclosure

    Miura,Y. / Arino,T. / Kanzaki,T. et al. | Kraftfahrwesen | 1980



    Air-cooled diesel engine appraisal

    Bachle, C.F. | Engineering Index Backfile | 1957