High-pressure internal combustion engines promise high efficiency, but a proper injection strategy to minimize heat losses and pollutant emissions remain a challenge. Previous studies have concluded that two injectors, placed at the piston bowl's rim, simultaneously improve the mixing and reduce the heat losses. The two-injector configuration further improves air utilization while keeping hot zones away from the cylinder walls. This study investigates how the two-injector concept delivers even higher efficiency by providing additional control of spray -and injection angles. Three-dimensional Reynolds-averaged Navier-Stokes simulations examined several umbrella angles, spray-to-spray angles, and injection orientations by comparing the two-injector cases with a reference one-injector case. The study focused on heat transfer reduction, where the two-injector approach reduces the heat transfer losses by up to 14.3 % compared to the reference case. Finally, this study connected the two-injector approach to a waste-heat recovery system through GT-Power 1-D simulations, increasing the importance of heat transfer reduction. The final two-injector system then delivered a 54.4% brake thermal efficiency compared to 53% of the one-injector reference case.
Effects of Multiple Injectors on Spray Characteristics and Efficiency in Internal Combustion Engines
Sae Technical Papers
SAE WCX Digital Summit ; 2021
2021-04-06
Aufsatz (Konferenz)
Englisch
SAE Technical Papers | 2015
|SAE Technical Papers | 2006
|