Bore distortion was measured in a 2.0 liter in-line 4-cylinder gasoline engine, chosen because its siamesed bore design was expected to incur high bore distortion. The method adopted was to install 10 Micro-Epsilon eddy-current transducers in an invar carrier attached to the under crown of the piston. The transducers emerged through apertures in the piston at second ring level where they were in close proximity to the bore surface. A 2-beam linkage system was used to carry miniature co-axial cables to the engine exterior. Measurements were recorded at various speeds and loads up to 6000 rev/min.Maximum bore distortion was 86 microns, arising from clamping loads, thermal effects and combustion pressure. The head bolts spaced around the bore gave rise to fourth order distortion, but the dominant influence was thermal loading which induced second order distortion, attributed directly to the siamesed bore design. The combustion pressure proved to have the least influence.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Measurement of Bore Distortion in a Firing Engine


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE 2002 World Congress & Exhibition ; 2002



    Erscheinungsdatum :

    04.03.2002




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Measurement of bore distortion on a firing engine

    Bird,L.E. / Cartside,R.M. / Federal Mogul,US | Kraftfahrwesen | 2002


    Measurement of Bore Distortion in a Firing Engine

    Bird, L. E. / Gartside, R. M. / Society of Automotive Engineers | British Library Conference Proceedings | 2002


    CAE Simulations for Engine Block Bore Distortion

    Ghasemi, Amir | SAE Technical Papers | 2012


    CAE Simulations for Engine Block Bore Distortion

    Ghasemi, A. / Society of Automotive Engineers | British Library Conference Proceedings | 2012


    Analysis of Cylinder Bore Distortion During Engine Operation

    Suzuki, Makoto / Abe, Shizuo | SAE Technical Papers | 1995