The combustion process in a homogeneous charge compression ignition (HCCI) engine is mainly governed by ignition wave propagation. The in-cylinder pressure, heat release rate, and the emission characteristics are thus largely driven by the chemical kinetics of the fuel. As a result, CFD simulation of such combustion process is very sensitive to the employed reaction mechanism, which model the real chemical kinetics of the fuel. In order to perform engine simulation with a range of operating conditions and cylinder-piston geometry for the design and optimization purpose, it is essential to have a chemical kinetic mechanism that is both accurate and computational inexpensive. In this paper, we report on the evaluation of several chemical kinetic mechanisms for methanol combustion, including large mechanisms and skeletal/reduced mechanisms. These mechanisms are evaluated in terms of homogeneous ignition delay time, laminar flame speed, and multi-phase simulations of HCCI heavy-duty engine. The results are compared with experimental data and evaluated in terms of the accuracy and computational cost. It was found that scattering of ignition delay time predicted from different chemical kinetic mechanisms reported in the literature under homogeneous mixture ignition conditions give rise to a high sensitivity of the engine in-cylinder pressure prediction to the selected mechanism.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Comparison of Kinetic Mechanisms for Numerical Simulation of Methanol Combustion in DICI Heavy-Duty Engine


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Konnov, Alexander A. (Autor:in) / Li, Changle (Autor:in) / Qin, Fei (Autor:in) / Tuner, Martin (Autor:in) / Pucilowski, Mateusz (Autor:in) / Li, Rui (Autor:in) / Xu, Shijie (Autor:in) / Bai, Xue-Song (Autor:in)

    Kongress:

    WCX SAE World Congress Experience ; 2019



    Erscheinungsdatum :

    2019-04-02




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Effect of Start of Injection on the Combustion Characteristics in a Heavy-Duty DICI Engine Running on Methanol

    Li, Changle / Tuner, Martin / Pucilowski, Mateusz et al. | SAE Technical Papers | 2017


    The Effect of Injection Pressure on the NOx Emission Rates in a Heavy-Duty DICI Engine Running on Methanol

    Tuner, Martin / Pucilowski, Mateusz / Jangi, Mehdi et al. | SAE Technical Papers | 2017


    The Effect of Injection Pressure on the NOx Emission Rates in a Heavy-Duty DICI Engine Running on Methanol

    Pucilowski, Mateusz / Jangi, Mehdi / Shamun, Sam et al. | British Library Conference Proceedings | 2017


    Injection Strategy of DME in a DICI Engine

    Yoon, H. / Jang, J. / Bae, C. et al. | British Library Conference Proceedings | 2007


    Numerical Simulation of Combustion in a Heavy Duty Diesel Engine

    Kusaka, J. | British Library Conference Proceedings | 2006