Track tensioning assembly is used in tracked vehicles to maintain the tautness of the track. The track tensioning system consists of the rear idler wheel which applies pressure on the track and a mechanism to increase or decrease the tension.This paper is a study of reaction forces and its effects on the chassis due to rear idler position. Rubber track layouts have been focus for most of the research work, here we study the effect of rear idler position on chassis structure through simulated analysis.An agriculture paddy combine harvester with rubber track is considered for the purpose of this work. Firstly the complete chassis structure is modeled in 3D using Creo and exported to Pro Mechanica for simulation. The real time forces, constraints were applied and the results were correlated to actual field results. The simulations were optimized through several iterations to match the field test results. For further optimization the chassis structure model has been simplified to carry out relative analysis for different tensioning positions.Relative position of the idler along the vertical axis was varied to study the effect of reaction forces on structure. Finally the results were compared to obtain the optimized position of rear idler through relative simulation. The optimized rear idler position is found based on reduced loads to the structure.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Simulated Analysis of Rear Idler Position on Rubber Track Chassis Structure


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Benedicts, Samraj (Autor:in) / Seshan, Vivek (Autor:in)

    Kongress:

    SAE 2015 Commercial Vehicle Engineering Congress ; 2015



    Erscheinungsdatum :

    29.09.2015




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Simulated Analysis of Rear Idler Position on Rubber Track Chassis Structure

    Benedicts, Samraj / Seshan, Vivek | British Library Conference Proceedings | 2015


    SUSPENSION SYSTEM FOR A TRACK-DRIVEN WORK VEHICLE WITH TANDEM REAR IDLER/ROLLER

    WEYER JASON EDWARD / VIK BRIAN / ZURN DANIEL J | Europäisches Patentamt | 2020

    Freier Zugriff

    Suspension system for a track-driven work vehicle with tandem rear idler/roller

    WEYER JASON EDWARD / VIK BRIAN / ZURN DANIEL J | Europäisches Patentamt | 2023

    Freier Zugriff

    DETERMINING IDLER WEAR BASED ON POSITION OF IDLER ASSEMBLY

    JOHANNSEN ERIC J | Europäisches Patentamt | 2024

    Freier Zugriff

    Staggered idler wheel track assembly

    BRAZIER GLEN | Europäisches Patentamt | 2017

    Freier Zugriff